Advertisement
IMPORTANT NOTE: The cable used in the following procedure is
included in the kit. Specify by number the required length when
ordering the kit.
2
Installation procedures
1.
Locate the cable clamp on the upper right corner of the board.
Put the straight end of the cable assembly through the cable
clamp.
Figure 2: Cable clamp
2.
Attach the right angle SMA fitting of the cable to the board ANT-
1, connector (J42).
Figure 3: Attach at ANT 1
2106123MNAA | WI-FI ANTENNA KIT | 5
Advertisement
Need help?
Do you have a question about the 2106049 and is the answer not in the manual?
Questions and answers