Advertisement
Safety
Observe warning signs on packaging and on the devices, prior to
software configuration.
Safety symbol conventions
The following conventions are used throughout this document to bring
attention to important information:
"NOTICE" hazards are associated with equipment or property damage,
it must be understood that under certain operating conditions,
operating damaged equipment can result in degraded system /
process performance leading to serious or life-threatening injuries.
Therefore, compliance with all "NOTICE" hazards is required at all
times.
WARNING – Bodily injury: This symbol and with the signal
!
word "WARNING", indicates a potentially dangerous situation.
Failure to observe this safety information will result in death
or severe injury. The text may state the hazard, how to avoid
the hazard, and the result if not followed. The bolt is for
electrical warnings; the exclamation point is for general
warnings.
IMPORTANT NOTE: This symbol indicates operator tips,
particularly useful information, or important information about the
product or its further uses.
Potential safety hazards
WARNING – Bodily injury: Make sure no explosive
!
atmosphere is present before connecting or disconnecting any
connector or performing maintenance on this unit.
WARNING – Bodily injury: to prevent RF exposure and
!
damage to equipment remove all power sources before
installing the Antenna Kit.
2106123MNAA | WI-FI ANTENNA KIT | 3
Advertisement
