Fax Characters (Hex) - Panasonic FP Series Technical Manual

FP Modem-EU Technical Manual
modem starts dialing the stored number.
The converting can take some time (about 30 seconds to 1 minute). If the fax has
been sent successfully, you receive the hang-up message (class2) and OK or
ERROR as a response. If the fax could not be sent, there is no automatic repetition.
A new attempt has to be initiated by the PLC.
Please use the FPWIN Pro Library "Modem" for PLC programming support.

3.8.1 Fax Characters (HEX)

The following set of characters is implemented. Characters that are not included in this set of
characters are replaced by a space.
0x20 – 0x2F
!,",#,$,%,&,',(,),*,+,,,-,.,/
0x30 – 0x3F
0,1,2,3,4,5,6,7,8,9,:,;,<,=,>,?
0x40 – 0x4F
@,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O
0x50 – 0x5F
P,Q,R,S,T,U,V,W,X,Y,Z,Ä,Ö,Ü,ß,_
0x60 – 0x6F
',a,b,c,d,e,f,g,h,i,j,k,l,m,n,o
0x70 - 0x7F
p,q,r,s,t,u,v,w,x,y,z,ä,ö,ü,~
For special characters, e.g. umlauts, you have to use special fax characters, depending on
whether you are working with a Windows or a DOS operating system:
Umlaut Windows
ä 0xE4
ö 0xF6
ü 0xFC
Ä 0xC4
Ö 0xD6
Ü 0xDC
ß 0xDF
DOS
0x84
0x94
0x81
0x8E
0x99
0x9A
0xE1
3.8 ASCII-Fax Function
43