ATT NUSSBAUM SMART LIFT 2.30 SL Operating Manual And Inspection Book
  1. Manuals
  2. Brands
  3. ATT NUSSBAUM Manuals
  4. Lifting Systems
  5. SMART LIFT 2.30 SL
  6. Operating manual and inspection book

ATT NUSSBAUM SMART LIFT 2.30 SL Operating Manual And Inspection Book

Hide thumbs
Table of Contents

Advertisement

Quick Links

Operating Manual and Inspection Book
Including Spare Parts List
SMART LIFT 2.30 SL □
HYMAX S 3000
SMART LIFT 2.35 SL □
HYMAX S 3500
SMART LIFT 2.40 SL □
HYMAX S 4000

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMART LIFT 2.30 SL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ATT NUSSBAUM SMART LIFT 2.30 SL

Summary of Contents for ATT NUSSBAUM SMART LIFT 2.30 SL

  • Page 1 Operating Manual and Inspection Book Including Spare Parts List SMART LIFT 2.30 SL □ HYMAX S 3000 SMART LIFT 2.35 SL □ HYMAX S 3500 SMART LIFT 2.40 SL □ HYMAX S 4000...
  • Page 2 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 3 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 SMART LIFT 2.30 SL □ HYMAX S 3000 SMART LIFT 2.35 SL □ HYMAX S 3500 SMART LIFT 2.40 SL □...

  • Page 4: Table Of Contents

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Contents Introduction ..........................5 Assembly protocol ......................... 7 Transfer protocol ........................8 General information ......................9 Set up and test the lift ....................9 Hazard information ......................

  • Page 5: Introduction

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Introduction Nussbaum products are a result of many years of experience. A high quality standard and superior concept guarantees you reliability, long lifetimes and economical operation.
  • Page 6 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Organizational measures The operating manual is always to be kept ready at the location of use of the system.

  • Page 7: Assembly Protocol

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 After successful set up, complete this form fully, sign it, make a copy and send the original to the manufacturer within a week.

  • Page 8: Transfer Protocol

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Transfer protocol The lift ..........With serial number ........was set up on (date) ........... At (company name) ........in (town, city) ............

  • Page 9: General Information

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 1 General information Technical documentation contains important information for safe operation and for retaining functional safety of the lift.

  • Page 10: Lift Master Forms

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Lift master forms 2.1 Manufacturer Otto Nußbaum GmbH & Co.KG Korker Strasse 24 D-77694 Kehl-Bodersweier 2.2 Purpose...

  • Page 11: Changes To The Design / Construction

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 2.3 Changes to the design / construction Inspections by a technical expert are required before recommissioning (Date, type of change, technical expert signature) ..............................

  • Page 12: Declarations Of Conformity

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 2.5 Declarations of conformity 20110015 OPI Version 1.0...
  • Page 13 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 14 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...

  • Page 15: Technical Information

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 3 Technical information 3.1 Technical data Total weight: SMART LIFT 2.30 SL / HYMAX S 3000 = 600 kg SMART LIFT 2.35 SL / HYMAX S 3500 = 650 kg...

  • Page 16: Safety Devices

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 3.2 Safety devices Safety mechanism for lift nut break Check the lift nut with the integrated wear display.

  • Page 17: Data Sheets

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 3.3 Data sheets 3.3.1 Data sheets 2.30 SL 20110015 OPI Version 1.0...
  • Page 18 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 19 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...

  • Page 20: Data Sheets 2.35 Sl

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 3.3.2 Data sheets 2.35 SL 20110015 OPI Version 1.0...
  • Page 21 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 22 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...

  • Page 23: Data Sheets 2.40 Sl

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 3.3.3 Data sheets 2.40 SL 20110015 OPI Version 1.0...
  • Page 24 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Concrete thickness: min. 200 mm Concrete quality: C20/25 20110015 OPI Version 1.0...

  • Page 25: Electrical Plans

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 3.4 Electrical plans 20110015 OPI Version 1.0...
  • Page 26 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 27 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 28 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 29 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...

  • Page 30: Safety Regulations

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 4 Safety regulations When working with lifts comply with legal accident prevention regulations according to BGG 945: Comply with inspection of lifts;...

  • Page 31: Operating Manual

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 5 Operating manual When handling the lift, it must absolutely comply with safety regulations. Carefully read the safety regulations in Section 4 before first operation! 5.1 Positioning the vehicle...

  • Page 32: Lifting The Vehicle

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Figure 3: To release the fixture plate, the rear lever must be pushed. • The lifting arm block must be ratcheted in after the fixture point has been reached.

  • Page 33: Lift Synchronization

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Once the "top" or "low - off" positions are reached two red LEDs will illuminate on the LED display. To prevent damage to the lift platform, it is not permitted, while the red LEDs are illuminated, to alternate between briefly lower and lift.

  • Page 34: Led Display On The Operating Unit

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 5.5 LED display on the operating unit The raising and lowering of the lift is monitored by a position measuring system. The individual functions are displayed additionally on the operating unit visually with an LED display.
  • Page 35 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...

  • Page 36: Behavior In Cases Of Error

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 6 Behaviour in cases of error Defective operational readiness of the lift may be due to a simple error. Check the system for the listed sources of error.

  • Page 37: Emergency Discharge

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Problem: The lift cannot be raised! possible causes: Repair: Only 2 phases active Do an on-site check with a qualified...

  • Page 38: Triggering The Safety Mechanism

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 6.3 Triggering the safety mechanism The lift is provided with a safety mechanism that activates when the lift nut breaks. After a break of the lift nut, the safety nut moving with the spindle takes up the slack on the spindle and assumes the load.
  • Page 39 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Figure 7: Version without CE stop Pos. 3 potentiometer for Up Off Pos. 4 potentiometer for Down Off...

  • Page 40: Maintenance And Care Of The Lift

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 7 Maintenance and care of the lift Before maintenance, do all preparation work so there is no danger to life or limb or object damage during maintenance and repair work.

  • Page 41: Maintenance Plan

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 7.1 Maintenance plan Before beginning service, disconnect from power. The work area around the lift is to be secured against unauthorized use.
  • Page 42 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Check the lift spindle for wear (damage). At least 1 x per year Lightly oil the lubrication felt between the spindle centring and lift nut.
  • Page 43 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Spindle centring (run-on delay) Torque: Approx. 4 Nm Gap: Approx.1 mm At least 1 x per Rear side: The half shells are attached.
  • Page 44 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Lubricate the safety nut lubrication nipple once per month with multi-purpose grease. This is done through the provided hole in the lifting rails. For this, the spindle cover (see g) must be removed and pulled upwards.
  • Page 45 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Check all fastening screws and anchors with a torque wrench. Fastening class 8.8 0.08* 0.12** 0.14*** At least 1 x per year 17.9...

  • Page 46: Cleaning The Lift

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Check electrical components for damage. Plug At least 1 x per year Reversing switch and LED display...

  • Page 47: Readjustment Of The Polyflex Belt

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 7.3 Readjustment of the polyflex belt When exchanging the drive belt, the belt tension must be readjusted. For this, remove the v-belt cover.

  • Page 48: Check / Exchange The Lift Nut System

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Figure 16: Measurement instrument • The measurement device, as can be seen in Figures 16 and 17 on the polyflex belt.

  • Page 49: Checking The Stability Of The Lift

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 7.5 Checking the stability of the lift • Retighten nuts of the approved fastening anchors to the torques specified by the manufacturer using a pre-set torque wrench.
  • Page 50 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 After inspection within the anchor zone of influence (200 mm diameter) (see technical data sheet of the anchor manufacturer), if there is visible damage (hairline cracks, cracks or similar), or if the required torque cannot be applied then the set up location is unsuitable.

  • Page 51: Electrical Assembly And Power Connection

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 • If required, fill in cavity under the baseplate with an equalizing mass. • Tighten anchors with a torque wrench.
  • Page 52 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Figure 23: Cable path when using risers and cross-pipes B) without using risers and cross-pipes (sub-floor) •...
  • Page 53 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Figure 24: Cable path without using riser and cross-pipe 20110015 OPI Version 1.0...

  • Page 54: Lifting Arm Assembly

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 8.2 Lifting arm assembly • Hang in the standard lifting arm and then place an acid-free multi-purpose grease into the joint bolts in each case from above into the hole and then insert the enclosed locking ring.
  • Page 55 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Selection the Liebig anchor without floor cover (screed, tiles) (valid 2.30 SL, 2.35 SL, 2.40 SL) Hole diameter 22 mm in the baseplate...
  • Page 56 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Figure: Selection the Liebig anchor with floor cover (screed, tiles) (Valid 2.30 SL, 2.35 SL, 2.40 SL)
  • Page 57 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Figure: Selection the Liebig anchor without floor cover (screed, tiles) Valid for (2.50 SL II, 2.50 SL DG II)
  • Page 58 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Figure: Selection the Liebig anchor with floor cover (screed, tiles) Hole diameter 26 mm in the baseplate...
  • Page 59 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Marking the anchoring depth Änderungen vorbehalten! subject to alterations! sous réserve des modifications! SMART LIFT / HYMAX S...
  • Page 60 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Betonqualität min C20/25 normal bewehrt Quality of concrete Normal armouring Änderungen vorbehalten! subject to alterations! sous réserve des modifications!

  • Page 61: Safety Inspection

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 9 Safety inspection The safety inspection is required to guarantee operational safety of the lift. It is to be done: 1.
  • Page 62 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Scope of delivery: Screw M8 2x Nuts 2x Base plate 2x Guide bar 2x Fixing bracket 2x...
  • Page 63 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Preparation Ensure there is no load on the lift. Allen key wrench 3 mm Unscrew cover panels 20110015 OPI Version 1.0...
  • Page 64 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Move the carrier arm upwards, then disconnect the lift from mains power or lock the switch Plug in the fixing bracket 20110015 OPI Version 1.0...
  • Page 65 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 If required, move the latch bar into position with a nail puller Place the guide bar onto the spindle bearing and push from below into the fixing bracket.
  • Page 66 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Fasten the guide bar with M8 screws Ensure that the guide bar and slot hole are fastened flush, the guide bar reaches slightly over the edge.

  • Page 67: Single Safety Inspection Before Commissioning

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Single safety inspection before commissioning Copy, Complete and leave in the inspection book Serial number:____________________________ Test step...

  • Page 68: Regular Safety Inspection And Maintenance

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Regular safety inspection and maintenance Copy, Complete and leave in the inspection book Serial number:____________________________ Test step...
  • Page 69 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Regular safety inspection and maintenance Copy, Complete and leave in the inspection book Serial number:____________________________ Test step...
  • Page 70 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Regular safety inspection and maintenance Copy, Complete and leave in the inspection book Serial number:____________________________ Test step...
  • Page 71 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Regular safety inspection and maintenance Copy, Complete and leave in the inspection book Serial number:____________________________ Test step...
  • Page 72 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Regular safety inspection and maintenance Copy, Complete and leave in the inspection book Serial number:____________________________ Test step...
  • Page 73 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Regular safety inspection and maintenance Copy, Complete and leave in the inspection book Serial number:____________________________ Test step...
  • Page 74 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Regular safety inspection and maintenance Copy, Complete and leave in the inspection book Serial number:____________________________ Test step...
  • Page 75 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Regular safety inspection and maintenance Copy, Complete and leave in the inspection book Serial number:____________________________ Test step...
  • Page 76 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Regular safety inspection and maintenance Copy, Complete and leave in the inspection book Serial number:____________________________ Test step...
  • Page 77 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Regular safety inspection and maintenance Copy, Complete and leave in the inspection book Serial number:____________________________ Test step...

  • Page 78: Exceptional Safety Inspection

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Exceptional safety inspection Copy, Complete and leave in the inspection book Serial number:____________________________ Test step Defect Retest...

  • Page 79: Spare Parts List | Ersatzteilliste | Liste Des Pièces Des Rechange

    Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 10 Spare parts list | Ersatzteilliste | Liste des pièces des rechange Ersatzteilliste Spare parts list Liste des piéces de rechange 20110015 OPI Version 1.0...
  • Page 80 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Die Ersatzteile müssen den vom Hersteller festgelegten technischen Anforderungen entsprechen. Dies ist nur bei Originalteilen gewährleistet. Bei Nichtverwendung der Originalteile oder bei unsachgemäß...
  • Page 81 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Hubmutter komplett Nr. 232SL02018 mit Senkkopfschraube lifting nut complete Nr. 232SL02018 with hexagon screw Hubmutter komplett Nr. 232SL02018...
  • Page 82 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Abdeckhaube 225SL09012 225SL09012 225SL09012 225SL09012 Cover Couverture Steigrohr 225SL45073 225SL45073 225SL45073 225SL45073 Pipe Tuyau de montée 225SL09015...
  • Page 83 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 84 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Nr.1 Nr.2 Nr.3/ Nr.4/ Nr.5 Motor 2.30 SL 2.32 SL 2.35 SL 2.40 SL 2.50 SL 2.50 SL II...
  • Page 85 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Steuerung komplett / control unit complete 232SL03009 Steuerung 2.30 SL, 2.32 SL, 2.35 SL, 2.40 SL Schütz...
  • Page 86 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 2.30 SL Standard Tragarmsatz / standard arms 20110015 OPI Version 1.0...
  • Page 87 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 2.30 SL 2-fach Tragarmsatz (MB/BMW-Version) 20110015 OPI Version 1.0...
  • Page 88 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 2.32 SL 3-fach Tragarmsatz (MB/BMW-Version) 20110015 OPI Version 1.0...
  • Page 89 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 2.32 SL Mini-Max 20110015 OPI Version 1.0...
  • Page 90 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 91 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 92 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 2.32 SL Transporter-Tragarme 20110015 OPI Version 1.0...
  • Page 93 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 2.40 SL Standard Tragarme 20110015 OPI Version 1.0...
  • Page 94 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 2.40 SL Mini-Max Tragarme 20110015 OPI Version 1.0...
  • Page 95 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Grundrahmen / base frame Grundrahmen / baseframe 2.28 SL 2.30 SL 2.30 SL MB 2.32 SL 2.35 SL / 2.40 SL...
  • Page 96 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 2.50 SL Ersatzteilliste 20110015 OPI Version 1.0...
  • Page 97 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Hubsäule Bedienseite 250SL05203 Column master side Abdeckung 250SL09004 cover Abdeckband 972434 Rubber cover Abdeckung 250SL09212 cover Steigrohr...
  • Page 98 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Control unit: 250SL03000TG (without CE-Stop) (valid since 04/06) Schutzhaube / cover 9232SL03026 Schütz / up contactor 990842 Schütz / up contactor...
  • Page 99 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 CE-Stop Überbrückungstaster: (bestehend aus) 990130, 990142 , 990133 991045 (grünes Tastenschild) Hauptschalter / main switch 990018 Schutzhaube / cover 9232SL03026 Schütz / up contactor...
  • Page 100 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 Tragteller komplett pad complete 235TTKAS08055 Gummiteller 901103031 Rubber pad Kopfschutz 250HDL28028 Head protection 2.50 SL Schraubenablage Screw storage Satz/Set 2 St.
  • Page 101 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 SL Gleichlaufpoti komplett SL Potentiometer complete 232SL03003 Motor 2.50 SL II 232SL01003 Energieset komplett / Energy set complete...
  • Page 102 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 103 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 104 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 105 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 106 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 107 Opera ting Ma nua l a nd Inspection Book SMART LIFT 2.30 SL, 2.35 SL, 2.40 SL / HYMAX S 3000, 3500, 4000 20110015 OPI Version 1.0...
  • Page 108 Otto Nußbaum GmbH & Co.KG | Korker Str. 24 | D 77694 Kehl-Bodersweier www.nussbaum-group.de | e-Mail: info@nussbaum-group.de Service Hotline Germany: 0800 5 288 911 Service Hotline International: +49 180 15 288 911 20110015 SMART LIFT 2.30 SL-2.35 SL-2.40 SL - HYMAX S 3000-3500-4000 OP+ETLI | EN | Version 1.0...

This manual is also suitable for:

Smart lift 2.35 slSmart lift 2.40 slHymax s 3000Hymax s 3500Hymax s 4000

Table of Contents