Table of Contents
Advertisement
Quick Links
1
APPLICATION ...................................................................................... 3
2
DESCRIPTION (FIG. A) ....................................................................... 3
3
PACKAGE CONTENT LIST ................................................................. 3
4
SYMBOLS ............................................................................................ 4
5
GENERAL SAFETY INSTRUCTIONS ................................................. 4
5.1
Working area ........................................................................................................... 4
5.2
Personal safety ....................................................................................................... 4
6
PETROL SAFETY WARNING ............................................................. 6
7
SPECIFIC SAFETY WARNINGS ......................................................... 6
8
ASSEMBLY .......................................................................................... 7
8.1
Bike handle installation (Fig. 1) ............................................................................. 7
8.2
Installation protection guard (Fig. 2) ..................................................................... 7
8.3
Installing the harness (Fig. 3) ................................................................................ 7
8.4
Replace the metal blade to spool .......................................................................... 7
8.4.1
Disassembly metal blade .......................................................................................... 7
8.4.2
Assembly spool (Included) ........................................................................................ 7
8.4.3
Assembly spool (POWACG1051) (Fig.4a+b) ........................................................... 7
9
FUEL AND LUBRICATION .................................................................. 7
9.1
Fuel .......................................................................................................................... 7
9.2
Mixing fuel ............................................................................................................... 8
9.2.1
Fuel and lubrication symbols..................................................................................... 8
9.2.2
Recommended fuels ................................................................................................. 8
10 OPERATING INSTRUCTIONS ............................................................ 8
10.1
Harness .................................................................................................................... 8
10.2
Starting a cold engine............................................................................................. 8
10.3
minutes) ................................................................................................................... 8
10.4
To stop the engine .................................................................................................. 9
10.5
Trimming procedures ............................................................................................. 9
10.5.1
Trimming / mowing (Fig. 5) ....................................................................................... 9
10.5.2
Closer trimming ......................................................................................................... 9
Copyright © 2019 VARO
POWPG40140
P a g e
| 1
EN
www.varo.com
Advertisement
Table of Contents
Related Manuals for Powerplus POWPG40140
Summary of Contents for Powerplus POWPG40140
-
Page 1: Table Of Contents
POWPG40140 APPLICATION ..................3 DESCRIPTION (FIG. A) ............... 3 PACKAGE CONTENT LIST ..............3 SYMBOLS .................... 4 GENERAL SAFETY INSTRUCTIONS ..........4 Working area ......................4 Personal safety ....................... 4 PETROL SAFETY WARNING ............. 6 SPECIFIC SAFETY WARNINGS ............6 ASSEMBLY .................. - Page 2 POWPG40140 10.5.3 Fence / foundation trimming..................9 10.5.4 Trimming around trees ....................9 10.5.5 Scalping (Fig. 6) ......................9 10.5.6 Do not sweep with trimmer..................9 10.6 Cutting with blades ....................10 11 MAINTENANCE ................. 10 11.1 Air filter ........................10 11.2...
-
Page 3: Application
POWPG40140 BRUSH CUTTER 41.2CC POWPG40140 1 APPLICATION Depending on the assembled cutting tools, the bush cutter can be used to mow lawns or meadows, and to trim scrub, shrubs, bushes and very small trees. WARNING! For your own safety, read this manual and general safety instructions carefully before using the appliance. -
Page 4: Symbols
POWPG40140 4 SYMBOLS The following symbols are used in this manual and/or on the machine: Read the manual before Wear sturdy shoes with antiskid using the machine. soles! Denotes risk of personal Wear approved hearing injury or damage to the tool. - Page 5 POWPG40140 ▪ Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable you retain control over the tool in unexpected situations. ▪ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from the tool.
-
Page 6: Petrol Safety Warning
POWPG40140 6 PETROL SAFETY WARNING WARNING: Use extra care in handling fuels. They are flammable and the vapours are explosive. The following points must be observed. ▪ Use only an approved container. ▪ Never remove the fuel cap or add fuel with the power source running. Allow engine exhaust components to cool before refuelling. -
Page 7: Assembly
POWPG40140 8 ASSEMBLY Bike handle installation (Fig. 1) Install the U-handle on the fixing holder, install the clamp and fasten with the screws. Installation protection guard (Fig. 2) ▪ Remove the 2 screws from the guard. ▪ Position the guard so it can be fixed into place with the clamp and the screws. -
Page 8: Mixing Fuel
POWPG40140 recommended mixing ratio of 100:1. If insufficient lubrication is the cause of engine damage, it voids the manufacturer’s engine warranty. Mixing fuel Add oil to an approved fuel container followed by the petrol to allow incoming petrol to mix with oil. -
Page 9: To Stop The Engine
POWPG40140 ▪ If fuel tank was not run dry, pull starter. one to three times and should start. 10.4 To stop the engine ▪ Push the switch to the “O” position and hold it down for a few seconds until the engine stops. -
Page 10: Cutting With Blades
POWPG40140 10.6 Cutting with blades AVOID KICKOUT Kickout refers to the reaction of a moving blade if it contacts a strong tree, brush or a solid object. The force that results violently pushes the blade away in an arc. Kickout may cause loss of control resulting in injury to the operator or bystanders. -
Page 11: Carburettor Adjustment
POWPG40140 When the inside of the fuel tank is dirty, it can be cleaned by rinsing the tank out with gasoline. 11.3 Carburettor adjustment The carburettor was pre-set at the factory for optimum performance. When further adjustment is necessary, contact the service department. -
Page 12: Removing A Unit From Storage
POWPG40140 15 REMOVING A UNIT FROM STORAGE ▪ Remove sparking plug. ▪ Pull starter rope briskly to clear excess oil from combustion chamber. ▪ Clean and gap sparking plug or install a new sparking plug with proper gap.(Fig. 24) ▪... -
Page 13: Warranty
We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool. ▪ Repairs may only be carried out by an authorised customer service centre for Powerplus tools. ▪ You can always obtain more information at the number 00 32 3 292 92 90. -
Page 14: Declaration Of Conformity
POWPG40140 19 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Brush cutter 41,2CC Trade mark: POWERplus Model: POWPG40140 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards.
Need help?
Do you have a question about the POWPG40140 and is the answer not in the manual?
Questions and answers