auna Moving 80.1 LED Manual page 20

EN
20
6 BASS CONTROL: This adjusts the bass frequencies, Use this
control to get the best sounding bass response for your
instrument.
7 SD CARD READER: Use this socket to connect your memory
card to the unit by SD card.
(Note: SD card memory must be less than 64GB.)
8 BATTERY STATUS BAR: While the unit is powered ON, that
Blue light is lit. the Red lights indicate the power in the low-
battery that need to charge. when Green light is lit, that unit is
plugged in and charge the battery.
9 LEDS METER
10 USB INTERFACE:
• Use this socket to connect your pen drive or external disk
to the unit using USB interface.
(Note: Mobile disk memory must be less than 64GB.)
• Connect your device's charge cable here to charge it. USB
charging only functions when the unit power is turned on.
11 FLASH: Press this button to cycle through different screen
effects.
• Moving transverse lights (non-reactive to music)
• Square lights wipe (non-reactive to music)
• Transverse lights wipe (non-reactive to music)
• Diagonal Light wipe (non-reac tive to music)
• Wavy Line (non-reac tive to music)
• Shimmering lights (non-reac tive to music)
• Pulsating bars (reac tive to music)
• Off (no lights)
12 PREVIOUS BUTTON: Press to move the input to the previous
track in MP3 & Bluetooth mode, hold for a few seconds to
search backwards within the current track ( not included
Bluetooth mode).
13 PLAY/PAUSE BUTTON: Press once to begin playing, Press
again to pause. ( USB priority)
14 NEXT BUTTON: Press to move the input to the next track in
MP3 & Bluetooth mode. hold for a few seconds
to search forwards within the current track( not included
Bluetooth mode).