Lexus KMA10 Series Dismantling Manual page 27

REMOVE SERVICE PLUG GRIP
CAUTION:
・Wear insulated gloves.
・Do not inspect or service the high voltage
system with the service plug grip installed.
・To reduce the risk of electric shock, make sure
to remove the service plug grip to cut off the
high voltage circuit before servicing the
vehicle.
・To reduce the risk of electric shock, make sure
to wait at least 10 minutes after removing the
service plug grip to fully discharge the high
voltage capacitor inside the inverter with
converter assembly.
NOTICE:
・After removing the service plug grip, turning the
power switch on (READY) may cause a malfunction.
Do not turn the power switch on (READY) unless
instructed by the repair manual.
・Do not touch the terminals of the service plug grip.
・If the service plug grip has been struck or dropped,
replace it.
HINT:
Waiting for at least 10 minutes is required to discharge the high voltage capacitor inside the
inverter with converter assembly.
*a
23
*a
Without waiting for 10
minutes