Using The Preset Station Feature - Yamaha TX-761DAB Owner's Manual

Dab/fm/am stereo tuner
Table of Contents

Advertisement

Press SELECT on the front panel (or remote
4
control) to confirm the selection of the
program type.
Rotate PRESET/TUNING (or press
5
TUNING k / n) to start searching for the
corresponding Radio Data System stations.
This unit starts searching for the Radio Data System
stations corresponding to the selected program type.
While this unit is searching the Radio Data System
stations, "Search" and the name of the selected
program type appear alternately in the front panel.
Once this unit finds the Radio Data System station
corresponding to the selected program type, this unit
stops searching.
National Music
FM 99.80MHz
y
To stop searching for stations, press INFO/TEXT on the
front panel (or remote control).
Notes
If the station found is not the one you desire, this unit
automatically tunes into the last tuned station.

Using the preset station feature

You can then recall any preset station easily by selecting
the preset station.
DIMMER
AUTO SCAN
MEMORY
STANDBY
/ON
MEMORY
1
4
Numeric
buttons
7
0
ENTER
FUNCTION
FM MODE
SELECT
TUNING MODE
■ Automatic station preset
You can use the automatic station preset feature to store
AM and FM stations with strong signals up to 30 of those
stations for each band in order.
Press BAND on the front panel (or remote
1
control) repeatedly to select the reception
band (FM/AM).
Press and hold MEMORY on the front panel
2
(or remote control) for more than 3 seconds.
This unit starts searching of the stations with strong
signals and storing the stations to the preset station
memory of this unit automatically. "Auto memory"
appears in the front panel display while this unit is
searching the stations.
Auto memory
CH03 FM100.05MHz
When automatic preset tuning is completed, the front
panel display shows the frequency of the station
preset to "01".
y
After you perform the automatic preset station memory for AM
or FM, also perform the operation for another band (AM or FM).
Notes
• If no station is found, this unit is tuned into the last tuned
station.
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• Only FM and AM stations with sufficient signal strength are
stored automatically by automatic preset tuning. If the station
you want to store is weak in signal strength, tune into it
manually and store it as described in "Manual station preset" on
the next page.
FM/AM tuning
PRESET/TUNING
BAND
INFO/TEXT
FUNCTION
SELECT
DAB/FM/AM
FM MODE
TUNING MODE
BAND
PRESET/TUNING
DAB/FM/AM
BAND
2
3
BAND
INFO/TEXT
5
6
AUTO SCAN
8
9
MEMORY
MEMORY
CLEAR
CLEAR
TUNING k / n
TUNING
21
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents