EnGenius EnStation5-ACv2 User Manual page 20

Pole mounting the EnStation5-ACv2
1. Put the included rubber into the bracket.
2. Plug the dynamic stick into the bracket.
3. Screw the sealing nut and assembled parts, as well as
tighten it.
4. Put the nock washer on the dynamic stick.
5. Assemble t he mounting parts to the EnStation. .
4
5
1
2
3
6. Thread the open end of the pole strap through the two
tabs on the bracket.
7. Lock and tighten pole strap to secure bracket to the pole
20
6
7