EnGenius EnStation5-ACv2 User Manual page 19

Wall mounting the EnStation5-ACv2
1. Put the included rubber into the bracket.
2. Plug the dynamic stick into the bracket.
3. Screw the sealing nut and assembled parts, as well as
tighten it.
4. Put the nock washer on the dynamic stick.
5. Assemble t he mounting parts to the EnStation. .
4
5
1
2
3
6. Determine the mounting location. Mark and drill two
pilot holes aligning to the screw holes of the bracket
7. Put wall anchors into the holes and insert screw into the
wall anchor.
8. Screw and secrue the bracket in the place.
8
A
19
6
7
B
Dimension:
A: Ø5.5*18 mm
B: Ø8*25 mm