Monster Markut M7 User Manual page 21

Hide thumbs Also See for Markut M7:
Table of Contents

Advertisement

Available languages

Available languages

EN
AC/DC Adapter
Ensure that your notebook is connected to an AC power source via the AC adapt-
er before turning it on for the first time. If the notebook automatically shuts
down due to low battery power, it is likely to cause system failure. Below are
some Dos and Don'ts of an AC/DC adapter.
Dos
Use the adapter that shipped with your notebook only.
Always be aware of heat coming from the in use AC/DC adapter.
Unplug the AC power cord before disassembly the notebook.
Don'ts
Cover an in-use adapter since it can generate heat.
Have the AC power cord plugged after powering off the system when the
notebook is going to be left unused for a longer time.
Battery
When you get a new notebook or a new notebook battery, it is important to know
how to charge and care for your battery in order to get the most out it for as long
as you can.
Be aware of that the battery may not be replaced by users.
Safety guidelines
This notebook is equipped with a non-removable battery, follow the local
regulations while discarding the notebook.
Always keep the notebook and its battery away from excessive moisture and
extreme temperatures.
Always unplug the AC power cord before installing any module to the notebook.
Battery type
This notebook may be equipped with a high-capacity Li-ion or Li-polymer
battery pack depending on the model you have.
The rechargeable battery pack is an internal power source of the notebook.
Battery charging behavior
To optimize battery life and avoid a sudden power loss, read the tips below:
Suspend system operation if the system will be idle for a while or shorten the
suspend timer's time period.
Turn off the system if you won't be using it for a period of time.
Disable unnecessary settings or remove idle peripherals.
Connect an AC/DC adapter to the system whenever possible.
20

Advertisement

Table of Contents
loading

Table of Contents