Features; Operating Instructions - Carbest 81909 User Instruction

UK

FEATURES

• 4 different charging modes fits for 6 V/12 V battery charging and battery
maintaining.
• Fully automatic; When the voltage of the battery is above 8 V (12 V battery) or
4.5 V (6 V batteries), battery charger will automatically power on to charge the
battery, and it will automatically power off when battery is fully-charged.
• Built-in circuit protection guards against overcharging or short circuit.
• Automatically check the polarity (requires a minimum of 2.5 volts battery voltage).
• Convenient, color-coded clamps for easy, correct installation.
• Charges with high frequency, pure DC current.
BATTERY CHARGER AND COMPONENTS
Power indicator
Reverse connecting indicator

OPERATING INSTRUCTIONS

!
IMPORTANT:
Always disconnect the AC power cord from AC power outlet before connecting (or
disconnecting) the charger to (or from) the battery.
Connecting the charger and charging the battery with battery clamps. The charger's
output leads have color-coded battery clamps (red »positve« and black »negative«).
1. Unplug the battery charger AC cord from the AC outlet.
2. Disconnect the battery clamps from the unit at output and cord connector.
3. Plug the AC cord into the AC outlet (230 V ~ 50/60 Hz).
4. Press the mode button to select right charging voltage.
5. Connect the red positve clamp to the positve post of the battery.
6. Connect the black negative clamp to the negative post of the battery. The power
indicator will light in green. Note: if reversely connect, the red indicator will light
with buzz alarm. If short circuit, the digital screen will show »
charger will charging the battery automatically.
7. Leave the unit on.
8. Monitor the battery from time to time.
!
Please make sure selecting right voltage before connecting to battery. After
battery connected, output voltage can not be switched by mode button.
Carbest Batterie Ladegerät | Battery Charger 81909 Carbest Batterie Ladegerät | Battery Charger 81909
Mode button
20
« Then the