Table of Contents
Advertisement
Suunto Smart Heart Rate Belt
3. Getting started
After a few simple steps, you are ready to use your Suunto Smart Heart Rate Belt to get
accurate feedback about your exercise intensity.
3.1. Putting on belt
To start using the Suunto Smart Heart Rate Belt:
1. Snap the Suunto Smart module firmly into the chest strap.
2. Adjust the belt length as needed.
3. Moisten the electrode areas with water or electrode gel.
4. Put the belt on so that it fits tightly and the Suunto logo is facing up.
The belt turns on automatically when it detects a heart beat.
TIP: Wear the belt against your bare skin for best results.
Suunto Smart module sensor can also be used with Movesense compatible sports garment.
Simply, moisten the electrode areas on the apparel and snap the sensor into the apparel
connector.
3.2. Pairing
You need to connect (pair) your Suunto Smart Sensor module with compatible Bluetooth
Ⓡ
Smart devices to view your heart rate.
Pairing procedures may vary, so refer to the instructions of your mobile application or sports
watch for guidance. When pairing, ensure you are at least 10 m (33 ft) away from other
Bluetooth sensors.
You can pair the belt with multiple sports watches and apps, but only one connection can be
active at a time.
For mobile devices and smart watches, we recommend the use of the free Sports Tracker App
to enable a rich sports tracking experience that supports the use of a heart rate belt.
5
Advertisement
Table of Contents
