Advanced Operation; Advanced Operations; Selecting The Osd Mode; Using The Sleep Timer - Yamaha RX-V1400 Owner's Manual

ADVANCED OPERATIONS

Selecting the OSD mode

You can display this unit's operating information on a
video monitor. If you display the SET MENU and sound
field program parameter settings on a monitor, it is much
easier to see the available options and parameters than it is
by reading this information on the front panel display.
1
Turn on the video monitor connected to this
unit.
2
Press ON SCREEN repeatedly to change the
OSD mode.
The OSD mode changes in the
following order: full display, short
display, and display off.
Full display
Always shows the sound field program parameter settings
as well as the contents of the front panel display.
Short display
Briefly shows the contents of the front panel display at the
bottom of the screen each time you operate this unit.
Display off
P02 CONCERT HALL
. DSP LEVEL;;;;0dB
INIT DLY;;;;30ms
ROOM SIZE;;;;1.0
LIVENESS;;;;;;;5
Full display
Notes
• The OSD signal is not output to the REC OUT jack, and will
not be recorded.
• You can set the OSD to turn on (gray background) or off when a
video source is not being reproduced (or the source component
is turned off) by using "Display set" (see page 56).
44
ADVANCED OPERATIONS
ON SCREEN
DISPLAY
P02 CONCERT HALL
Short display

Using the sleep timer

Use this feature to automatically set this unit in the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to the AC OUTLET(S).
Setting the sleep timer
TRANSMIT
SYSTEM
POWER
PHONO
V-AUX
DTV
POWER
TV
1
Select a source and start playback on the
source component.
2
Press SLEEP repeatedly to
set the amount of time.
Each time you press SLEEP, the front
panel display changes as shown
below. The SLEEP indicator flashes
while switching the amount of time for sleep timer.
SLEEP 120 min.
SLEEP OFF SLEEP 30 min.
V–AUX DVR/VCR2 VCR 1 CBL/SAT
SLEEP
S L E E P
SP
A
The "SLEEP" indicator lights up on the front panel
display after the sleep timer has been set.
V–AUX DVR/VCR2 VCR 1 CBL/SAT
SLEEP
C O N C E R T H A L L
SP
A
RE–NAME CLEAR LEARN
2
STANDBY SLEEP INPUT MODE
TUNER CD MULTI CH IN
CBL/SAT MD/TAPE CD-R
VCR 1 DVR/VCR2 DVD
SELECT
POWER
AMP
AV
SLEEP
SLEEP 90 min.
SLEEP 60 min.
DTV DVD MD/TAPE CD–R CD TUNER
VOLUME
HiFi DSP
1 2 0 m i n
DTV DVD MD/TAPE CD–R CD TUNER
VOLUME
HiFi DSP
PHONO
L L R
PHONO
L L R