Table of Contents
Advertisement
Available languages
Available languages
Installation
Mounting
Hanging
The fixture can be mounted in a hanging position using the quicklock brackets.
Fixture must be safe mounted in accordance with the relevant regulations and
provided with a safetycord to prevent falling. For this purpose, an eyelet for
safeties is attached to the device.
Standing
The fixture can be mounted in an upright or sitting position. A safe and
sufficient anti-slip ground must be ensured!
NOTE
The LED module can be operated in any position.
DMX-Connection
Use specified DMX-cables to connect the units to each other and to connect them to the control-
desk. Enter the addresses and personalities to the fixtures.
DMX Addr.1
DMX
Addr.(Nx1)+1
DMX512
CONTROLLER
E-25
DMX
Addr.(Nx2)+1
. . . . . . . . . . . .
Advertisement
Table of Contents
