Focon Showtechnic Expolite Tour-Cyc 540 User Manual page 30

Miscellaneous Settings
MENU
Settings Settings
PERSON PERSON
Display Rev: flips the screen display by 180°. This is e.g. useful when the fixture is hanging upside
down.
Display: In the submenu Display the display illumination can be set to turn off automatically approx.
one minute after entering the last setting (OFF) or to stay illuminated generally (ON).
.
DMX Fail: sets how the fixture responses if DMX-signal gets lost. Set Hold to hold the last
received value or Blackout for blackout.
Dimmer Curve: In the submenu Dimmer Curve, it is possible to choose different dimmer curves.
Every curve activates a different dimmer delay, as shown below.
Linear
Dimmer Response: the submenu Dimmer Response sets if the dimmer of the led responses
immediately to changes (LED) or with a slight delay as a halogen bulb (Halogen).
White Balance: In the submenu White Balance a custom colour calibration is stored which limits the
maximum brightness of the colour channels RGBW at the DMX value "255".
NOTE: The maximum value can be limited to 0. In this case, a colour channel does not respond
to a sent DMX value, which can be misinterpreted as a device error.
Display Rev ON
OFF
Display ON
OFF
DMX Fail Hold
Blackout
Dimmer Curve Linear
Exp
Log
S-Curve
Dimmer Response LED
Halogen
White Balance Red
Green
Blue
White
Auto
Fan Set
High
Reset Wireless DMX Memory
Wireless DMX
TEST ON
OFF
Factory Reset
Yes
No
Keylock ON
OFF
Exp
E-30
0 - 255
0 - 255
0 - 255
0 - 255
YES
NO
Log
S-Curve