Automatic Preset Tuning - Yamaha R-V303 Owner's Manual

AUTOMATIC PRESET TUNING

You can make use of an automatic preset tuning function for FM stations. With this function, this unit performs automatic tuning and
stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual
preset tuning method on page 21.
To store stations
1
FM/AM
2
MEMORY
MAN'L/AUTO FM
Press and hold for
about 3 seconds.
3
To tune to higher frequencies, press right side once.
To tune to lower frequencies, press left side once.
* If the TUNING button is not pressed, in a while, the
automatic preset tuning begins automatically toward higher
frequencies.
The automatic preset tuning begins from the frequency
currently displayed. Received stations are programmed to
A1, A2 ... A8 sequentially.
* If more than 8 stations are received, they are also
programmed to the preset station numbers of other groups
(B, C, D and E) in that order.
If you want to store the first station received by the
automatic preset tuning to a desired preset station
number;
If, for example, you want to store the first received station to
C5, select "C5" by using the A/B/C/D/E button and the preset
station number selector buttons after pressing the MEMORY
button in step 2. Then press the TUNING button. The first
received station is stored to C5, and next stations to C6, C7 ...
sequentially.
If stations are stored up to E8, the automatic preset tuning will
be finished automatically.
22
NATURAL SOUND AV RECEIVER
STANDBY/ON
A/B/C/D/E 1
PHONES
FM
PRESET
AM
FM
MEMORY AUTO TUNING
Flashes.
DOWN TUNING UP
TAPE/MD
VCR
MONITOR
TUNER PHONO
2 3 4 5 6 7 8
BASS TREBLE BALANCE
FM/AM DOWN TUNING UP
0 0 0
l l l l l l
2 2 2 2 2 2
TUNING
3 3 3 3 3 3 MEMORY EDIT MODE
4 4 4 4 4 4
5 5 5 5 L 5 5 R
MAN'L/AUTO FM AUTO/MAN'L MONO
1 2 3
When the automatic preset tuning is finished;
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedure of the section "To recall a preset
station" on page 21.
To recall a preset station
Simply follow the procedure of the section "To recall a preset
station" on page 21.
Notes
You can replace a preset station by another FM or AM
station manually by simply following the procedure of the
section "To store stations" on page 21.
If the number of received stations is not enough to be stored
up to E8, the search will be finished automatically after
searching all frequencies.
With this function, only FM stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune to it in monaural
manually and program it by following the procedure of the
section "To store stations" on page 21.
VOLUME
l6
20 l2
VIDEO
28
8
4
40
2
60
CD
0
–dB
CENTER
CENTER REAR
EFFECT MODE LEVEL LEVEL
PROGRAM
0 l0 0 l0