Yamaha HTR-5960 Owner's Manual page 40

AUTO SETUP
y
If you are not satisfied with the results or want to manually
adjust each parameter, run "MANUAL SETUP" (see
page 83).
Notes
• If you change speakers, speaker positions, or the layout of
your listening environment, run "AUTO SETUP" again to
recalibrate your system.
• The distances displayed in the "DISTANCE" results may
be longer than the actual distance depending on the
characteristics of your subwoofer.
• In the "EQ" results, different values may be set for the
same band to provide finer adjustments.
8
Press ENTER to return to the top
"RESULT:EXIT" display.
PRESET/CH
ENTER
A-E/CAT. A-E/CAT.
9
Make sure the pointer is pointing at "SET"
and "CANCEL" and then press j / i to select
"SET" or "CANCEL".
PRESET/CH
ENTER
A-E/CAT. A-E/CAT.
Choices: SET, CANCEL
• Select "SET" to confirm the "AUTO SETUP"
results.
• Select "CANCEL" to cancel the "AUTO SETUP"
results.
36
RESULT:EXIT
WARNING (3)
RESULT
.
SP : 5/4/0.1
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
. >SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
RESULT:EXIT
WARNING (3)
RESULT
.
SP : 5/4/0.1
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
. >SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
10
Press ENTER to confirm your selection.
The top "SET MENU" display appears in the OSD.
PRESET/CH
ENTER
A-E/CAT. A-E/CAT.
11
Press SET MENU to exit from "SET MENU".
SET MENU
SRCH MODE
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
. ;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
MENU