Toro TimeCutter MX 4200 Setup Instructions page 4

5
Checking the Mower
Adjustment
No Parts Required
Procedure
Adjust the side-to-side level and the front-to-rear blade slope.
Use the relevant procedures in the Operator's Manual to verify
that the deck is level, and make any adjustments as necessary.
Refer to the Operator's Manual for more information.
6
Completing the Setup
Parts needed for this procedure:
1 Ignition key
1 Hose coupling (not included with CE models)
1 Operator's Manual
1 Engine Operator's Manual
1 Operator training material
Procedure
Checking the Tire Pressure
Check the front and rear tires for proper inflation; refer to
Checking the Tire Pressure in the Operator's Manual for the
recommended inflation pressure.
Checking the Side-Discharge Chute
Remove the packing restraint holding the side discharge chute
up and lower the chute into place.
Checking the Engine-Oil Level
Before you start the engine and use the machine, check the
oil level in the engine crankcase; refer to Checking the Oil
Level in the Operator's Manual.
Keep all the following items with the machine:
•
Ignition key
•
Hose coupling (not included in CE models)
•
Operator's Manual
•
Engine Operator's Manual
•
View the Operator training material before operating the
machine.
4