Table Of Program Names For Each Input Format - Yamaha HTR-5590 Owner's Manual

DIGITAL SOUND FIELD PROCESSING (DSP)

Table of Program Names for Each Input Format

Input
Program
No.
8 MOVIE 70 mm Spectacle
THEATER 1
9 MOVIE 70 mm Adventure
THEATER 2
10 DOLBY
DIGITAL
DTS DGTL
SUR
PRO LOGIC
PRO LOGIC
DTS Neo: 6
*1 means the DTS ES Matrix decoder is active.
*2 means the DTS ES Discrete decoder is active.
y
• If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will be automatically
switched to the Dolby Digital playback sound field or DTS playback sound field.
• If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the EX/ES button on the
remote control, the Dolby Digital EX or DTS ES decoder will automatically turn on and the corresponding DSP program will be
selected.
• EX/ES on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with rear center speaker. In this case the
program name changes to the corresponding name for 6.1 channel.
• When playing 6.1 channel source with EX/ES on the remote control off, the program name changes to the corresponding name for
5.1 channel.
Note
• The " " indicator does not light up when selecting the program No. 10 except for the Enhanced mode.
38
2 channel DOLBY DIGITAL
Stereo EX decoder:
inactive (off)
DGTL Spectacle
70 mm Sci-Fi DGTL Sci-Fi
DGTL Adventure
70 mm General DGTL General
— Normal
— Enhanced
— —
— —
Normal —
Enhanced —
Movie —
Music —
Cinema —
Music —
DOLBY DIGITAL
DOLBY DIGITAL
EX decoder:
active (on)
Spectacle EX
Sci-Fi EX
Adventure EX
General EX
Dolby D EX
EX Enhanced
—
—
—
—
—
—
—
—
DTS
DTS ES DTS ES
decoder: decoder:
inactive (off) active (on)
DTS Spectacle Spectacle ES
DTS Sci-Fi Sci-Fi ES
DTS Adventure Adventure ES
DTS General General ES
— —
— —
Normal ES Matrix 6.1*
ES Dscrt 6.1 *
Enhanced Enhanced ES
— —
— —
— —
— —
— —
— —
1
2