Using The Remote Control - Yamaha HTR-5590 Owner's Manual

o SELECT k/n
Selects the another component to control independently
from the input that has been selected by pressing an input
selector button.
p AV POWER
Turns on and off the power of the component selected by
the input selector button.
a AMP
Selects AMP or other component selected by the input
selector button.
s VOL +/–
Increases or decreases the volume level.
d MUTE
Mutes the sound. The MUTE indicator turns on when the
MUTE function is on. Press again to restore the audio
output to the previous volume level.
f SET MENU (MENU)
Selects the SET MENU mode.
g ON SCREEN (DISPLAY)
Displays the operation status of this unit and the
parameter settings for DSP programs on the monitor (see
page 23).
h STEREO/EFFECT
Switches the normal stereo or DSP effect reproduction.
When STEREO is selected, 2-channel input signals are
directed to the main left and right speakers without effect
sounds. All Dolby Digital and DTS audio signals except
for the LFE channel are also directed to the main left and
right speakers.

Using the Remote Control

NATURAL SOUND AV RECEIVER
D I G I T A L
STANDBY
/ON
6CH INPUT MODE
PRESET/ PRESET
A/B/C/D/E TUNING /TUNING FM/AM MEMORY
TUNER
SPEAKERS BASS PROCESSOR
EDIT MAN'L/AUTO FM AUTO/MAN'L MONO
A B EXTENSION DIRECT
PHONES S VIDEO
STEREO PROGRAM
DSP
EFFECT
SILENT
30° 30°
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
I Handling the remote control
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– high humidity or temperature such as near a heater,
stove or bath;
– dusty places; or
– in places subject to extremely low temperatures.
CONTROLS AND FUNCTIONS
VOLUME
TUNING
MODE BASS TREBLE
VIDEO L AUDIO R OPTICAL
VIDEO AUX
– + – +
Approximately 6 m (20 feet)
7