Related Manuals for MIDWEST FASTENERS Talon
Summary of Contents for MIDWEST FASTENERS Talon
- Page 1 Talon Weld Gun Manual/Gun Supplement ( Also used and compatible with SureShot, Eagle and other pin/stud welding systems.)
- Page 2 MIDWEST FASTENERS, INC. 450 Richard Street Miamisburg, OH 45342 Phone: (800) 852-8352 Fax: (937) 866-4174 ©2007 Midwest Fasteners, Inc. All rights reserved. Printed in U.S.A.
- Page 3 Notice of any claim for warranty repair must be furnished to MIDWEST FASTENERS within ten (10) days after the defect is discovered. MIDWEST FASTENERS does not assume liability for shipping, or liability for any labor or material related to use of this system, unless such costs are expressly authorized in writing by MIDWEST FASTENERS.
- Page 4 TALON GUN SETUP Your Talon gun setup will depend on your application and the particular pin to be welded. Setting up the gun consists of the following: 1. Locate the pins (or studs) that were shipped for your job and load a pin to the weld gun.
-
Page 5: Insulation Pins With Collet Protector
1/8"- 3/16" pin flange extends 1/8"- 3/16" beyond beyond foot (or spark shield.) foot (or spark shield.) 4. Retighten adjustment screw. 4. Retighten adjustment screw. (Fig. 3) (Fig. 4) TALON Weld Gun ©2007 MIDWEST FASTENERS, INC. —... - Page 6 8-32 x 3/4 Soc Head Screw 060-3010-05 Shaft Spring (Red) 060-3221-00 Shaft Boot 101-0801-01 Weld Gun Leg (Optional) 060-3222-07 Boot Retainer * Connectors may vary with System in use. Talon shown for reference. TALON Weld Gun ©2007 MIDWEST FASTENERS, INC. —...
- Page 7 450 Richard Street • Miamisburg, OH 45342 www.midwestfasteners.com • Fax: (937) 866-4174 (800) 852-8352 11/07...
Need help?
Do you have a question about the Talon and is the answer not in the manual?
Questions and answers