Connect With Pc - Nevir NVR-TAB7 S1 Instruction Manual

for a second until the machine can turn to the main interface once the
power is enough.
The built-in polymer battery should be charged regularly. The
�
damage caused by battery over-consuming is not included in the
warranty.
Boot and Shutdown
Boot: Press and hold the power button, the system will enter the
boot process System has been started, entering the Android
system。
The system enters the default home interface.
Shutdown: Press the power button, pop-up device options,
select Power off, Click OK, you can safely shut down

Connect with PC

By mini USB (OTG) interface of the device, you can connect with PC by mini
USB
cable attached with the device. USB Data transferring is available. You can
files through the PC.
operate the
When your device is connected successfully, to pull up the notification area of the
bar, can see the USB icon
status
Then click
Click
Note: The device also supports the FAT32 format for external devices,
for example U disk, Micro SD card to Transfer data.
to enter the next step
, Then the device can transmission data with PC.
15
.