Connect With Pc - Nevir NVR-TAB8 S1 Instruction Manual

used.
be
when it is charging, the icon of battery will be rolling.
when the charging finish, the battery icon will turn green and stop rolling.
�
If you do not use this device for a long time, please
charge/release it once per month to avoid deep discharge.
When it is power off because of low battery, connect to the
�
charger, the device will indicate "low power" or "charging", please wait
for a second until the machine can turn to the main interface once the
power is enough.
The built-in polymer battery should be charged regularly. The
�
damage caused by battery over-consuming is not included in the
warranty.
Boot and Shutdown
Boot: Press and hold the power button, the system will enter the
boot process System has been started, entering the Android
system。
The system enters the default home interface.
Shutdown: Press the power button, pop-up device options,
select Power off, Click OK, you can safely shut down

Connect with PC

By mini USB (OTG) interface of the device, you can connect with PC by mini
USB
cable attached with the device. USB Data transferring is available. You can
files through the PC.
operate the
When your device is connected successfully, to pull up the notification area of the
bar, can see the USB icon
status
Then click to enter the next step
15
.