Basic Introduction - Nevir NVR-TAB7 S1 Instruction Manual

Basic Introduction

* CPU: Rockchip 2928 Cortex A9 1Ghz
* LCD Screen: 7 " 800 * 480 TFT LCD
* Camera: Build-in 0 .3M pixel camera
* Operating System: Google Android 4.1
* Network Connection: Built-in 802.11b/g/n wireless
* Audio format: MP3,WMA,MP2,OGG,AAC,M4A ,FLAC,APE, WAV
* Video format: max 1080p full HD video （AVI,3GP, MP4,
MPG, RM, RMVB, MOV,FLV, WMV,MKV)
* Touch Panel: Capacitive Multi-touch
* Language: support multiple language
* Ports: mini USB*1(OTG) , mini HDMI*1,Earphone * 1, TF card slot * 1,DC
IN*1,MIC*1
* Buttons: Power/Reset
* GPU: Mali 400 3D
* RAM: 512 MB DDR3
* 2100 mAh Litium Battery
Quick Start
Battery management and charging
Before using this device, please charge it fully. Put the charger adapter into the DC
jack,
the device will start to charge.
【 TIPS】 :
This device adopts built-in polymer battery. Only the specified charger should
�
used.
be
when it is charging, the icon of battery will be rolling.
when the charging finish, the battery icon will turn green and stop rolling.
�
If you do not use this device for a long time, please
charge/release it once per month to avoid deep discharge.
When it is power off because of low battery, connect to the
�
charger, the device will indicate "low power" or "charging", please wait
14