Assembling The Cleaner; Using The Cleaner - Pentair BLUEFURY LITE Installation Manual

Assembling the Cleaner

1. Attach the Quick Connect fitting on the end of the hose to the feed tube on the BLUEFURY
Be sure the snaps are engaged.
2. Attach the debris bag to the cleaner. Push the bag over vacuum tube to click it into place.
3. Review checklist before use:
• Hoses cut properly and floats evenly spaced.
• Mender nuts are tight on feed hose.
• Wall fitting secure and in place.
• Debris bag and hose assembly attached.
• Ensure debris seal is attached. See Figure 9.

Using the Cleaner

1. Lower the cleaner carefully into pool.
2. Switch ON the FILTER PUMP.
3. Wait at least 60 seconds to allow air to blow out of the hose.
4. Switch ON the BOOSTER PUMP.
Debris Bag
Lead Hose
Mender Nut
Quick Connect Fitting
(with built-in swivel)
Feed Tube
Sweep Hose
Assembling the Cleaner
371885 (REV 12/2016)
Figure 9
Debris Seal
LITE Pressure Side Pool Cleaner.
®
Feed Tube
Debris Seal
8