Maintenance, Inspection And Cleaning - dallmeier Mountera Box with PSU Commissioning

8

Maintenance, Inspection and Cleaning

Maintenance and Inspection of the Device
The operational safety of the device has to be inspected periodically by
qualified personnel.
Electrical shock caused by exposed live electrical parts
Risk of death or serious injury
➡ All maintenance and repair work on the device may only be carried out
in a voltage-free state (verify the absence of voltage).
The maintenance, inspection and repair of the device may only be carried out
by qualified personnel and in compliance with the locally applicable regula-
tions (regional and country-specific legal requirements and standards), such
as the DIN VDE 0701-0702 series of standards (VDE 0701-0702: "Inspection
after repair, modification of electrical appliances – Periodic inspection on
electrical appliances – General requirements for electrical safety").
Cleaning the Device
The device has to be cleaned regularly to prevent the formation of deposits
that may permanently damage the surfaces of the device.
Damage to the surfaces of the device due to improper cleaning practices
➡ Clean the outside of the housing with a clean, soft and dry cloth.
•
Do not use detergents.
•
Do not use microfiber cleaning cloths.
•
Avoid excessive rubbing.
COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
WARNING
NOTICE
17