Warranty; Appropriate Use - dallmeier Mountera Box with PSU Commissioning

Table of Contents

Warranty

The terms and conditions valid at the time the contract was signed shall

apply.

Mountera® Box with PSU

The Mountera® Box with PSU is a junction box designed for mounting,

wiring and powering Panomera® systems and cameras that are equipped

with the Mountera® Quick-Lock System.

The junction box can be operated with a mains voltage of 100 – 240 V AC

(±10%) at a mains frequency of 50 – 60 Hz (±6%).

The built-in power supply unit provides a total output power of up to

260 watts and enables the simultaneous power supply of several suitable

Panomera® systems or cameras with 48 V DC each.

Made of robust aluminum and equipped with durable seals, the IP66-rated

junction box is suitable for 24/7/365 continuous operation both indoors and

outdoors.

The chromated surface of the junction box is finished with powder coating

in signal white (RAL 9003) which has been tested for seawater resistance

according to DIN EN 60068-2.

The Mountera® Box with PSU can be mounted directly on a ceiling or a wall

or – in combination with an adapter – on a pole.

The optionally available Mountera® brackets with Quick-Lock System and

internal cable routing enable quick and easy installation of the correspond-

ing Panomera® systems or cameras on the junction box without visible

cables.

Mountera® Box with SRS Edge

The Mountera® Box with SRS Edge combines the features of the

Mountera® Box with PSU with a SMAVIA Recording Server Appliance.

The fanless and energy-efficient server hardware offers passive cooling and

allows decentralized recording of high-resolution video streams on the

built-in SSD memory directly at the installation site.

Table of Contents

Mountera box with srs edge