Adjustment Of Delay Time - Yamaha RX-V592 Owner's Manual

Adjustment of DELAY TIME

You can adjust the time difference between the beginning of
the sound from the main speakers and the beginning of the
effect sound from the rear speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made to all programs individually.
RX-V692
PRO LOGIC : from 15 to 30 milliseconds
PRO LOGIC : from 15 to 30 milliseconds
ENHANCED
: from 15 to 30 milliseconds
70 mm MOVIE
THEATER
TV SPORTS : from 1 to 50 milliseconds
STADIUM : from 1 to 50 milliseconds
DISCO : from 1 to 50 milliseconds
ROCK CONCERT : from 1 to 50 milliseconds
JAZZ CLUB : from 1 to 50 milliseconds
CHURCH : from 1 to 50 milliseconds
CONCERT HALL : from 1 to 50 milliseconds
RX-V592
PRO LOGIC : from 15 to 30 milliseconds
PRO LOGIC : from 15 to 30 milliseconds
ENHANCED
CONCERT VIDEO : from 1 to 100 milliseconds
MONO MOVIE : from 1 to 100 milliseconds
STADIUM : from 1 to 50 milliseconds
DISCO : from 1 to 100 milliseconds
ROCK CONCERT : from 1 to 100 milliseconds
CONCERT HALL : from 1 to 100 milliseconds
Note
The values of the delay time, center level and rear level you set
the last time will remain memorized even when the power of
this unit is off.
However, if the power cord is kept disconnected for more than
one week, these values will be automatically changed back to
the original factory settings.
34
(Preset value: 20 milliseconds)
(Preset value: 20 milliseconds)
(Preset value: 17 milliseconds)
(Preset value: 20 milliseconds)
(Preset value: 45 milliseconds)
(Preset value: 14 milliseconds)
(Preset value: 22 milliseconds)
(Preset value: 26 milliseconds)
(Preset value: 40 milliseconds)
(Preset value: 30 milliseconds)
(Preset value: 20 milliseconds)
(Preset value: 20 milliseconds)
(Preset value: 28 milliseconds)
(Preset value: 20 milliseconds)
(Preset value: 45 milliseconds)
(Preset value: 14 milliseconds)
(Preset value: 17 milliseconds)
(Preset value: 30 milliseconds)
1
Press once or more so that "DELAY" appears on the
display.
DELAY/CENTER
/REAR/SWFR
2
By continuously pressing the "+" or "–" side of the
TIME/LEVEL button, the value changes continuously.
The value stops changing momentarily at the preset point.
TIME/LEVEL
Notes
Adding too much delay will cause an unnatural effect with
some sources.
When the TIME/LEVEL button is pressed, sound is
momentarily interrupted.
RX-V692
ms
DSP
RX-V592
ms
RX-V692
ms
DSP
Adjustable
RX-V592
ms