Delay Time And Speaker Output Levels - Yamaha RX-V396RDS Owner's Manual

Natural sound av receiver
Hide thumbs Also See for RX-V396RDS:
Table of Contents

Advertisement

When using the digital sound field processor with the Dolby
Pro Logic decoder or Dolby Digital decoder, you can adjust
the delay time between the main sound and sound effect,
and each speaker's output level as you wish.
Delay Time
You can adjust the time difference between the beginning of
the sound from the main speakers and the beginning of the
sound effect from the rear speakers. The larger the value,
the later the sound effect is generated. The delay time can be
individually adjusted to all DSP programs.
Notes
• Adding too much delay will cause an unnatural effect with some
sources.
• The sound is momentarily interrupted while adjusting the delay
time.
Program
1.
PRO LOGIC/Normal
DOLBY DIGITAL/Normal
PRO LOGIC/ENHANCED
DOLBY DIGITAL/ENHANCED
2.
70 mm SPECTACLE
DGTL SPECTACLE
70 mm SCI-FI
DGTL SCI-FI
3.
70 mm ADVENTURE
DGTL ADVENTURE
70 mm GENERAL
DGTL GENERAL
4.
MONO MOVIE
5.
TV SPORTS
6.
DISCO
7.
ROCK CONCERT
8.
CONCERT HALL
38

DELAY TIME AND SPEAKER OUTPUT LEVELS

Preset
Control
value
range (ms)
15 to 30
20
0 to 15
5
15 to 30
20
0 to 15
5
15 to 30
23
1 to 99
15
15 to 30
20
1 to 99
16
15 to 30
20
1 to 99
15
15 to 30
20
1 to 99
15
1 to 99
49
1 to 99
9
1 to 99
40
1 to 99
16
1 to 99
44
Sound Output Level of the Center,
Right Rear and Left Rear Speakers,
and Subwoofer
If desired, you can adjust the sound output level of each
speaker even if it has already been adjusted in
"ADJUSTING THE SPEAKER BALANCE" on pages 17
and 18.
Notes
• The sound output level of the center speaker cannot be adjusted
when the input signal is analog, PCM audio, or encoded with
Dolby Digital in 2-channel.
• If "CENTER SP" in the SET MENU is set to the NONE position,
the sound output level of the center speaker cannot be adjusted.
This is because the center channel sound is automatically output
from the right and left main speakers.
• Once the sound output level has been adjusted, the level will be
the same for all DSP programs.
Speaker
Control range (dB)
Center
–20 to +10
Right rear
–20 to +10
Left rear
–20 to +10
Subwoofer
–20 to 0
Preset value
0
0
0
0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents