Advertisement
Quick Links
SyncBox/N2X: Converts NTP or IEEE-1588 to IRIG, 10MHz, PPS, DCF77
and serial time telegrams
[1]
The SyncBox/N2X operates as an IEEE-1588 multicast slave clock or NTP client in a PTP / NTP network and
with its interfaces this converter can synchronize many different systems. Our [2]
Grandmaster Clocks
or a [3]
Key Features
- The following output signals are available: PPO (PPS, PPM, PPH, TC DCLS, DCF77 Marks) 10 MHZ
serial time string (Meinberg, Uni Erlangen, NMEA) Option: TC AM Frequenz Synth. sine
- IEEE 1588-2008 (PTP V2) compatible ordinary clock
- Serial COM port for initial configuration and time telegrams
- Supported Protocols: IPv4, NTP, PTP / IEEE 1588-2008, DHCP
- Signal outputs with fiber optical ST connectors available
- Generates several different modulated (AM) and unmodulated (DCLS) IRIG time code signals
- Option: N2X chassis with clamp for 35mm railmount
- 10/100Base-T Ethernet interface - Power over Ethernet option available on request
- Configuration and montoring with Meinberg Device Manager Software
rev 2020.1015.1509
LANTIME NTP Server
can be used as a reliable time source.
Page 1/5
Meinberg Radio Clocks
Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax:
+49 (5281) 9309-30
https://www.meinbergglobal.com
info@meinberg.de
IEEE-1588 PTP
syncbox_n2x
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Meinberg SyncBox/N2X
Summary of Contents for Meinberg SyncBox/N2X
- Page 1 SyncBox/N2X: Converts NTP or IEEE-1588 to IRIG, 10MHz, PPS, DCF77 and serial time telegrams The SyncBox/N2X operates as an IEEE-1588 multicast slave clock or NTP client in a PTP / NTP network and with its interfaces this converter can synchronize many different systems. Our [2]...
- Page 2 Description The Meinberg SyncBox N2X is synchronized by a PTP Grandmaster or by a NTP Server and can be used as a time source for equipment that requires IRIG AM, Freq.Synth/sine, PPO (PPS, PPM, PPH, IRIG DCLS, Cyclic Pulses, Single Shot, Timer, DCF77 Mark, Time Sync, Freq.
- Page 3 Characteristics Available Output Signals PPO (PPS, PPM, PPH, TC DCLS, DCF77 Marks), TC AM, serial timestring (Meinberg, Uni Erlangen, NMEA) and Frequency Synth. sine Control elements Meinberg Device Manager via RS-232 serial interface or network connector (RJ45 jack) Status info...
- Page 4 Generated time codes IRIG B002: 100pps, DCLS signal, no carrier, BCD time of year IRIG B122: 100pps, AM sine wave signal, 1 kHz carrier, BCD time of year IRIG B003: 100pps, DCLS signal, no carrier, BCD time of year, SBS time of day IRIG B123: 100pps, AM sine wave signal, 1kHz carrier, BCD time of year, SBS time of IRIG B006: 100 pps, DCLS Signal, no carrier, BCD time-of-year, Year IRIG B126: 100 pps, AM sine wave signal, 1 kHz carrier frequency, BCD time-of-year,...
- Page 5 Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. Manual...
Need help?
Do you have a question about the SyncBox/N2X and is the answer not in the manual?
Questions and answers