Using Set Menu - Yamaha RX-V1800 Owner's Manual

Using SET MENU

Use the remote control to access and adjust each
parameter.
y
• You can change the "SET MENU" parameters while this unit is
reproducing sound.
• If you press I PARAMETER during the "SET MENU"
operation, the "SET MENU" operation is canceled.
• Repeat the following procedure to select and adjust each
parameter setting.
• Press 4 RETURN to return to the previous menu level.
Set the operation mode selector to C AMP
1
and then press F SET MENU to enter "SET
MENU".
The top "SET MENU" display appears in the OSD.
2
Press 3 k / n to select "MANUAL SETUP".
SET MENU
;AUTO SETUP
. ;MANUAL SETUP
;SYSTEM MEMORY
;SIGNAL INFO
[ ]/[ ]:
[ENTER]:
Press 3 ENTER to enter "MANUAL SETUP".
3
The "MANUAL SETUP" display appears in the
OSD.
MANUAL SETUP
.
1 BASIC MENU
2 VOLUME MENU
3 SOUND MENU
4 INPUT MENU
5 OPTION MENU
[ ]/[ ]:
[ENTER]:
UP/DOWN
Enter
UP/DOWN
Enter
Customizing this unit (MANUAL SETUP)
4
Press 3 k / n repeatedly and then press
3 ENTER to select and enter the desired
menu.
The following displays are examples where "SOUND
MENU" is selected.
3 SOUND MENU
.
A)EQUALIZER
B)LFE LEVEL
C)DYNAMIC RANGE
D)LIPSYNC
E)AUDIO SET
F)HDMI SET
[ ]/[ ]:
[ENTER]:
5
Press 3 k / n repeatedly and then press
3 ENTER to select and enter the desired
submenu.
The following display is an example where "LFE
LEVEL" is selected.
B)LFE LEVEL
.
SPEAKER;;;;;;0dB
HEADPHONE;;-20dB
[ ]/[ ]:
[p]/[[]:
6
Press 3 k / n to select the desired parameter
and then 3 l / h to change the parameter
settings.
• Press 3 h to increase the value.
• Press 3 l to decrease the value.
Press F SET MENU to exit from "SET
7
MENU".
UP/DOWN
Enter
UP/DOWN
Adjust
79
En