Advanced Setup; Using The Advanced Setup Menu - Yamaha RX-V1800 Owner's Manual

This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
Notes
• The settings you make are reflected next time you press A MASTER ON/OFF inward to the ON position to turn on this unit (see
page 33).
• Only A MASTER ON/OFF, O STRAIGHT and the N PROGRAM selector are effective while you are using the advanced setup
menu.
• All the other operations cannot be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.

Using the advanced setup menu

Press A MASTER ON/OFF on the front
1
panel to release it outward to the OFF
position to turn off this unit.
Press and hold O STRAIGHT and then
2
press A MASTER ON/OFF inward to the ON
position to turn on this unit.
This unit turns on, and "ADVANCED MENU"
appears in the front panel display.
While holding
down
STRAIGHT
EFFECT
Rotate the N PROGRAM selector to select
3
the parameter you want to adjust.
The name of the selected parameter appears in the
front panel display.
Press O STRAIGHT repeatedly to change
4
the selected parameter setting.
Press A MASTER ON/OFF to release it
5
outward to the OFF position to save the new
setting and turn off this unit.
y
The settings you made are reflected next time you turn on this
unit.

Advanced setup

■ Speaker impedance SPEAKER IMP.
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8Ω MIN, 6Ω MIN
• Select "8Ω MIN" to set the speaker impedance to 8 Ω .
• Select "6Ω MIN" to set the speaker impedance to 6 Ω .
SPEAKER
8Ω MIN
MASTER
6Ω MIN
■ Remote sensor REMOTE SENSOR
Use this feature to activate or deactivate the signal-
receiving capability of the remote control sensor on the
front panel of this unit.
Choices: ON, OFF
• Select "ON" if you want to activate the signal-
receiving capability of the remote control sensor.
• Select "OFF" if you want to deactivate the signal-
receiving capability of the remote control sensor.
Note
We recommend that you set the parameter to "ON" in most cases.
Speaker
IMP.
Front
Center
Surround
Surround back
Front
Center
Surround
Surround back
Impedance level
The impedance of each
speaker must be 8 Ω or
higher.
The impedance of each
speaker must be 8 Ω or
higher.
The impedance of each
speaker must be 4 Ω or
higher.
The impedance of each
speaker must be 6 Ω or
higher.
117
En