Selecting Preset Stations - Yamaha RX-V1800 Owner's Manual

FM/AM tuning
Press G PRESET/TUNING/CH l / h to
4
select a preset station number (1 to 8) while
the MEMORY indicator is flashing.
• Press G h to select a higher preset station number.
• Press G l to select a lower preset station number.
A 1 : F M 8 8 . 9 M H z
Preset station number
Press J MEMORY while the MEMORY
5
indicator is flashing.
The station band and frequency appear in the front
panel display with the preset station group and
number you have selected. The MEMORY indicator
disappears from the front panel display.
A 1 : F M 8 8 . 9 M H z
The displayed station has been stored as A1.
Notes
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.
56
En

Selecting preset stations

You can tune into any desired station simply by selecting
the preset station group and number under which it was
stored.
Set the operation mode selector to C SOURCE and then
press 1 TUNER to select "TUNER" as the input source.
MEMORY
Press F A/B/C/D/E (or 3 A-E/CAT. l / h)
1
repeatedly to select the desired preset
Flashes
station group (A to E).
The preset station group letter appears in the front
panel display and changes each time you press the
button.
Press G PRESET/TUNING/CH l / h (or
2
3 PRESET/CH k / n) repeatedly to select
the desired preset station number (1 to 8).
The preset station group and number appear in the
front panel display along with the station band and
frequency.
A 1 : F M 8 8 . 9 M H z