Cinema-Dsp Programs - Yamaha RX-V1200 Owner's Manual

CINEMA-DSP

CINEMA-DSP Programs

I For moive programs: No. 8 to 10
According to the input signal format, this unit automatically chooses the appropriate decoder and DSP sound field
pattern.
Input
No. Program
8 MOVIE
70 mm Spectacle
THEATER 1
9 MOVIE 70 mm Adventure
THEATER 2
10 DOLBY
DIGITAL
DTS DIGITAL
SUR
PRO LOGIC
PRO LOGIC
DTS Neo: 6
*1 means the 6.1/ES decoder is ON.
*2 means the DTS ES software encoded with Discrete 6.1 is input.
y
• If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will be automatically
switched to the Dolby Digital playback sound field or DTS playback sound field.
• If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the 6.1/ES button on the
remote control, the Dolby Digital Matrix 6.1 or DTS ES decoder will automatically turn on and the corresponding DSP program will
be selected.
• 6.1/ES on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with rear center speaker. In this case the
program name changes to the corresponding name for 6.1 channel.
• When playing 6.1 channel source with 6.1/ES on the remote control off, the program name changes to the corresponding name for
5.1 channel.
Note
• The " " indicator does not light up when selecting the program No. 10 except for the Enhanced mode.
34
Table of Program Names for Each Input Format
2 channel
Stereo DOLBY DIGITAL
DGTL Spectacle
70 mm Sci-Fi DGTL Sci-Fi
DGTL Adventure
70 mm General DGTL General
— Normal
— Enhanced
— —
— —
Normal —
Enhanced —
Movie —
Music —
Cinema —
Music —
5.1 channel
DTS
DTS Spectacle
DTS Sci-Fi
DTS Adventure
DTS General
—
—
Normal
Enhanced
—
—
—
—
—
—
1
6.1 channel *
DOLBY DIGITAL DTS ES
Spectacle 6.1 Spectacle ES
Sci-Fi 6.1 Sci-Fi ES
Adventure 6.1 Adventure ES
General 6.1 General ES
Matrix 6.1
Enhanced 6.1
— ES Matrix 6.1
ES Discrete 6.1 *
— Enhanced ES
—
—
—
—
—
—
—
—
2
—
—
—
—
—
—