Net/Usb Menu - Yamaha RX-N600 Owner's Manual

Yamaha av receiver owner's manual
Hide thumbs Also See for RX-N600:
Table of Contents

Advertisement

SET MENU
Volume trim
D)VOLUME TRIM
Use this feature to adjust the level of the signal input at
each jack. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL,
V-AUX, DOCK, DVR, PC/MCX, USB, NET
RADIO, MULTI CH IN
Control range: –6.0 to +6.0 dB
Control step: 1.0 dB
Initial setting: 0.0 dB
D)VOLUME TRIM
DVD ->
[<]/[>]:Adjust
[RETURN]:Exit
84
En
DVD
0.0dB

3 NET/USB MENU

Use this menu to adjust the network and USB system
parameters.
3 NET/USB MENU
. A)NETWORK
B)PLAY STYLE
C)INFORMATION
[ ]/[ ]:Up/Down
[ENTER]:Enter
Network settings
Use this feature to view the network parameters (IP
address, etc.) or to change them manually.
A)NETWORK
.
DHCP
IP
SUBNET
GATEWAY 192.168.000.001
DNS (P) 192.168.000.001
DNS (S) 000.000.000.000
SET
[ ]/[ ]:Up/Down
[ENTER]:Enter
Note
The above display is an example.
DHCP DHCP
When this parameter is set to "ON", network parameters
for "IP", "SUBNET", "GATEWAY", "DNS (P)" and
"DNS (S)" obtained from a DHCP enabled router are
displayed. If DHCP server function is not available, set
this parameter to "OFF" to configure the network
parameters manually.
Choices: ON, OFF
IP address IP
Use this parameter to specify an IP address assigned to
this unit. This value must not duplicate the one used for
other devices in the target network.
Subnet mask SUBNET
Use this parameter to specify the subnet mask value
assigned to this unit.
y
For most of the cases, the subnet mask value can be set as
"255.255.255.0".
Default gateway GATEWAY
Use this parameter to specify the IP address of the default
gateway.
A)NETWORK
ON
192.168.000.002
255.255.255.000
>CANCEL

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rxn600blN600 - rx av network receiver

Table of Contents