Changing Sound Field Parameter Settings - Yamaha RX-N600 Owner's Manual

SOUND FIELD PROGRAMS
Changing sound field parameter
settings
You can enjoy good quality sound with the initial factory
settings. Although you do not have to change the initial
factory settings, you can change some of the parameters to
better suit the input source or your listening room.
Notes
• Use the "PARAM. INI" feature in "OPTION MENU" to
initialize the parameters of each sound field program within a
sound field program group (see page 88).
• When you set a sound field parameter to a value other than the
initial factory settings, an asterisk mark (*) appears by the
sound field parameter name in the OSD.
• You cannot change the sound field parameter values when
"MEMORY GUARD" in "OPTION MENU" is set to "ON"
(see page 87). If you want to change the sound field parameter
values, set "MEMORY GUARD" to "OFF".
y
• For details about the function and control range of each sound
field parameter, see page 69.
• Repeat steps 3 and 4 as necessary to change other sound field
program parameter settings.
• The available sound field parameters for some of the sound field
programs may be displayed on more than one page in the OSD.
In this case, press u / d to scroll through pages.
• If you press and hold j / i to change the sound field parameter
value, the initial factory settings are shown momentarily in the
front panel display.
CODE SET TRANSMIT
POWER POWER STANDBY POWER
TV AV
MD SLEEP
CD CD-R XM
CBL MULTI CH IN
DVD DTV TUNER
DOCK USB
V-AUX DVR NET
1
AMP
SOURCE
TV VOL TV CH VOLUME
TV
(U.S.A. model)
1
Set the component selector switch to AMP.
68
En
TV MUTE TV INPUT MUTE
3
STEREO MUSIC ENTERTAIN MOVIE
1 2 3 4
DIRECT ST.
STANDARD SELECT EXTD SUR.
5 6 7 8
SPEAKERS ENHANCER NIGHT STRAIGHT
9 0 10 ENT.
EFFECT
PRESET/CH
LEVEL SET MENU
TITLE MENU
SRCH MODE
BAND
4
ENTER
A-E/CAT. A-E/CAT.
2
RETURN DISPLAY
XM MEMORY ON SCREEN
REC
AUDIO
AMP
SOURCE
TV
2
Turn on the video monitor and then press
DISPLAY on the remote control.
The following display is shown in the OSD.
Sound field program category
P02
Cursor
.
DSP LEVEL;;;;0dB
P.INIT.DLY;;21ms
P.ROOM SIZE;;1.0
S.INIT.DLY;;25ms
S.ROOM SIZE;;1.0
Sound field parameters
3
Press one of the sound field program
selector buttons repeatedly to select the
desired sound field program you want to
adjust.
STEREO MUSIC
1 2
STANDARD SELECT
5 6
SPEAKERS ENHANCER
9 0
4
Press u / d to select the desired sound field
parameter and then j / i to change the
selected sound field parameter value.
• Press i to increase the value.
• Press j to decrease the value.
A-E/CAT.
DISPLAY
ON SCREEN
MUSIC
Pop/Rock
Sound field parameter
values
ENTERTAIN MOVIE
3 4
EXTD SUR. DIRECT ST.
7 8
NIGHT STRAIGHT
10 ENT.
EFFECT
PRESET/CH
ENTER
A-E/CAT.