Information On Jacks And Cable Plugs - Yamaha RX-N600 Owner's Manual

Yamaha av receiver owner's manual
Hide thumbs Also See for RX-N600:
Table of Contents

Advertisement

CONNECTIONS

Information on jacks and cable plugs

Audio jacks and cable plugs
AUDIO
DIGITAL AUDIO
L
R
(White)
(Red)
L
R
Left and right
analog audio
digital audio
cable plugs
Audio jacks
This unit has three types of audio jacks. Connection
depends on the availability of audio jacks on your other
components.
AUDIO jacks
For conventional analog audio signals transmitted via left
and right analog audio cables. Connect red plugs to the
right jacks and white plugs to the left jacks.
DIGITAL AUDIO COAXIAL jacks
For digital audio signals transmitted via coaxial digital
audio cables.
DIGITAL AUDIO OPTICAL jacks
For digital audio signals transmitted via optical digital
audio cables.
Notes
• You can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. When you connect components to both the
COAXIAL and OPTICAL jacks, priority is given to the signals
input at the COAXIAL jack. All digital input jacks are
compatible with 96-kHz sampling digital signals.
• Pull out the cap from the optical jack before you connect the
fiber optic cable. Do not discard the cap. When you are not
using the optical jack, be sure to put the cap back in place. This
cap protects the jack from dust.
16
En
DIGITAL AUDIO
COAXIAL
OPTICAL
(Orange)
O
C
Coaxial
Optical
digital
cable plug
audio cable
plug
Video jacks and cable plugs
VIDEO
S VIDEO
(Yellow)
S
V
Composite
S-video
video cable
cable plug
plug
Video jacks
This unit has three types of video jacks. Connection
depends on the availability of input jacks on your video
monitor.
VIDEO jacks
For conventional composite video signals transmitted via
composite video cables.
S VIDEO jacks
For S-video signals, separated into the luminance (Y) and
chrominance (C) video signals transmitted on separate
wires of S-video cables.
COMPONENT VIDEO jacks
For component video signals, separated into the
luminance (Y) and chrominance (P
transmitted on separate wires of component video cables.
y
When "VIDEO CONV." is set to "ON" (see page 86), the video
signals input at the VIDEO and S VIDEO jacks are converted and
output at the VIDEO, S VIDEO and COMPONENT VIDEO
jacks interchangeably.
COMPONENT VIDEO
Y
P
P
B
R
(Green)
(Blue)
(Red)
P
P
Y
B
R
Component
video cable
plugs
, P
) video signals
B
R

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rxn600blN600 - rx av network receiver

Table of Contents