Analog photoelectric smoke/heat detector (25 pages)
Summary of Contents for Nittan Evolution EVC-H Series
Page 1
Quality System Certificate No. 041 Assessed to BS EN ISO 9001 NITTAN EUROPE LTD. Hipley Street, Old Woking, Surrey, England, GU22 9LQ. UK Tel: +44 (0) 1483 769555 • Fax: +44 (0) 1483 756686 Web Site: www.nittan.co.uk • E-mail: sales@nittan.co.uk...
Page 2
The EVC-H Heat Detector forms part of a brand new range of fire detectors from Nittan Europe Ltd. called evolution. The EVC-H is an elegantly designed, low profile detector which is aesthetically pleasing, thus enabling it to blend unobtrusively into modern working environments.
Section 1 - INTRODUCTION Section 1 The EVC-H is an attractively styled, fast response, low profile heat detector. Introduction Page 3 It has been designed to replace any previous Nittan heat detector. Section 2 Operation Page 3 EVC-H features: Section 3 •...
• Ref No: NISM/EVC-H/05 • Date: 23.01.19 • Issue: 5 • evolution • EV C-H • heat detector instruction manual Section 3 - DETECTOR MODELS The EVC-H range of heat detectors are currently available in two versions. Others can be made available upon demand. i) EVC-H-A2S ii) EVC-H-CS These versions have three terminals for connection onto...
• Ref No: NISM/EVC-H/05 • Date: 23.01.2019 • Issue: 5 • evolution • EV C-H • heat detector instruction manual Section 5 - INSTALLATION In normal use, the EVC-H detector will be installed at ceiling level. Pass field wiring through cable hole in centre of base from rear of base.
• Ref No: NISM/EVC-H/05 • Date: 23.01.19 • Issue: 5 • evolution • EV C-H • heat detector instruction manual Section 7 - MAINTENANCE AND CLEANING Maintenance: The EVC-H detector is a high quality product engineered for reliability. In order to obtain optimum performance, periodic maintenance is required.
Page 7
• Ref No: NISM/EVC-H/05 • Date: 23.01.19 • Issue: 5 • evolution • EV C-H • heat detector instruction manual iv) Ensure that no equipment which may generate excessive heat has been installed in the vicinity of the detector since the last routine inspection. If such equipment has been installed, then you should notify the Safety Officer or other competent authority that its presence may cause false alarms.
Ensure that no debris is left on or around the thermistor once cleaning is complete. v) If the unit needs further cleaning or is damaged or corroded, please return the complete detector to Nittan Europe Ltd. for service. Section 8 - SPECIFICATIONS...
• Ref No: NISM/EVC-H/05 • Date: 23.01.19 • Issue: 5 • evolution • EV C-H • heat detector instruction manual Section 11 - DISPOSAL This symbol on the EVC-H indicates that this product must not be disposed of with household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Need help?
Do you have a question about the Evolution EVC-H Series and is the answer not in the manual?
Questions and answers