Table of Contents
Advertisement
Environmental Notices
The equipment covered by this manual must be disposed of or recycled in
accordance with the Waste Electrical and Electronic Equipment Directive (WEEE
Directive) of the European Community directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/
EU, for electrical and electronic equipment sold in the EU after July 2019. Such
disposal must follow national legislation for IT and Telecommunication equipment
in accordance with the WEEE directive: (a) Do not dispose waste equipment with
unsorted municipal and household waste. (b) Collect equipment waste separately.
(c) Return equipment using collection method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it
must be collected separately from other types of waste. In case of small items the
symbol may be printed only on the packaging or in the user manual. If you have
questions regarding the correct disposal of equipment go to www.omniton-systems.
com/support or e-mail to Omnitron at intlinfo@omnitron-systems.com.
Safety Warnings and Cautions
ATTENTION: Observe precautions for handling electrostatic discharge
sensitive devices.
WARNING: Potential damage to equipment and personal injury.
WARNING: Risk of electrical shock.
Page 3
iConverter
Quick Start Guide
Product Overview
The iConverter GM3 is an intelligent Network Interface Device (NID), that delivers
advanced Carrier Ethernet services and provides demarcation at the edges of a
network. The GM3 enables rapid service deployments, Service Level Agreement
(SLA) assurance and protection switching.
The GM3 supports carrier-class Ethernet Service OAM standards. IEEE 802.1ag
Connectivity Fault Management (CFM) proactively monitors service availability and
provides tools for rapid fault isolation. ITU-T Y.1731 adds Performance Monitoring
to monitor key SLA parameters including frame delay, frame delay variation, and
frame loss.
To access the user manuals for the Menu Interface (89xxUM-02x Menu Interface
iConverter GM3 and GM4 Network Interface Devices) and Command Line Interface
(89xxUM-01x Command Line Interface iConverter GM3 and GM4 Network Interface
Devices), go to the iConverter GM3 product pages at:
Front Panel
The front of the GM3 provides access to the serial console (management), RJ-45,
SFP and Fixed-Fiber ports. The SFP ports support 100/1000BASE-X SFP fiber
and 10/100/1000BASE-T copper transceivers.
2-Port Front Panel Layout
3-Port Front Panel Layout
®
GM3
www.omnitron-systems.com
Page 4
Advertisement
Table of Contents
