Using Steps - Carbest 80283 User Instruction

UK
!
CAUTION!
The device is for indoor use, do not use the device near flammable materials
or in any location that may accumulate flammable fumes or gasses�
Appliance shall only be used with rated voltage and frequency�
Hot surface when operating, especially at full load condition�
Make sure the polarity is correct�
Do not locate the device on the top of the battery� Especially wet type battery�
it may generate gas vapor while charging�
Do not charge non-rechargeable batteries�
Use the appliance only in the described manner�
Do not expose the device to a heat source, such as direct sunlight
or heating�
Store the device in a dry and cool place�
Do not open, No any user serviceable parts inside�

USING STEPS

1� First connect to the battery, switching on the charger, then charge start
to charge for the battery� It is with 7-stage charge function� The LCD
display auto� circularly� When overheat and short circuit protection, The
LCD screen display »-P-«�
2� The LCD screen display 60s, then auto� Off� Press the button, then
auto� display�
3� Long press the button »mode selection« to change the mode�
Note: there are three colors in switching power supply mode�
Green - 13�2 V, red - 13�4 V, orange - 13�8 V
4� By press the »status selection« button to change the LCD display�
Carbest | Smart Battery Charger 80283 | 80284 | 80285
15