7-Stage Automatic Charging - Carbest 80283 User Instruction

Automatic 7stage smart charger

Hide thumbs

Table of Contents

Available languages

1. Charging voltage LED: if you want to know charging voltage, please press the status

selection button until the charging current LED light on, then LCD screen display the

charger charging voltage�

2. Charging current LED: If you want to know charging current, please press the status

selection button until the charging current LED light on, then the LCD screen display

the charger charging current�

3. Charging stage LED: If you want to know the charger in which charging stage, please

press the status button until the charging stage LED light on, then the LCD screen

displays the charger in which charge stage� There are total 7 different charge stages�

4. Status selection button: By long press the »status selection« button to change the

LCD screen display the charging voltage, charging current or different charge stages�

5. Switching power supply LED: if you want to use this charger as a switching power

supply unit, please press the mode selection until the switching power supply LED

light on� There are three colors in switching power supply mode� Green- 13�2 V, red-

13�4 V, orange- 13�8 V�

6. GEL/AGM/WET batteries charging LED: by press the mode selection button to set-

ting the battery type�

7. Mode selection button: by long press this button to change this smart charger

to switching power supply function or setting GEL, AGM or WET batteries type�

8. LCD screen display: it shall display auto� circularly the charging voltage, current and

different charging stage by numbers� When overheat and short circuit protection,

the LCD displays »-P-«� It shall display 60s, and then auto� Off� Press the button, then

auto� display�