CipherLab RK25WO Reference Manual page 220

RK25WO Mobile Computer
Symbology
Matrix 25
Matrix 25
Length option
Redundancy
Verify Check Digit
Transmit Check Digit
Composite
Composite CC-A/B
Composite CC-A/B
Composite CC-C
Composite CC-C
Composite TLC-39
Composite TLC-39
Composite General Preference
UPC Composite Mode
GS1-128 Emulation
Mode
Description
Switch to enable Matrix 2 of 5 decoding.
Sets the length of the Matrix 2of 5 symbols to decode.

One Fixed length (Length 1)

Two Fixed lengths (Length 1>Length 2)

Max / Min Length (range: 0-55; Length 1<Length 2)

Any Length
Enables or disable read redundancy for Matrix 2 of 5.
Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
Decide whether to include the check digit in the data to
transmit.
Switch to enable Composite CC-A/B decoding.
Switch to enable Composite CC-C decoding.
Switch to enable Composite TLC-39 decoding.
UPC barcodes can be "linked" with a 2D barcode during
transmission as if they were one barcode.

UPC Never Linked: Transmit UPC barcodes regardless of
whether a 2D barcode is detected.

UPC Always Linked: Transmit UPC barcodes and the 2D
portion. If the 2D portion is not detected, the UPC barcode
will not be transmitted.
Note: CC-A/B or CC-C must be enabled.

Auto-discriminate:
Transmit UPC barcodes as well as the 2D portion if present.
Sets GS1-128 emulation mode for UCC/EAN Composite
Codes.
218
Default
Enable
Enable
Max / Min Length
(4-55)
Disable
Disable
Disable
Disable
Disable
Enable
Enable
Disable
Disable
UPC always Linked
Disable