CipherLab RK25WO Reference Manual page 185

HOW TO OUTPUT
After determining the keyboard emulation type, please configure how to output decoded
data, i.e. the "format" to present decoded data.
Setting
Auto Enter
Auto Enter character
Display Code Type
Display Code Length
Prefix
Suffix
Field Delimiter
Barcode charset
Clear Previous Data
Description
Adds an ENTER character before or after each string of decoded
data. The ENTER character can be defined in the "Auto Enter
character" field below. This function saves the trouble of pressing
a confirmation key to accept each string of decoded data. Options
are:

Disable

Decoded data + Enter char

Enter char + Decoded data
Adds a key code before or after the decoded data. If [Auto Enter]
is enabled, select the ENTER character to send. Options are:

None

Carriage Return

Tab

Space

Comma

Semicolon
Prefixes the output data with code type information.
Suffixes the output data with code length information.
Affixes 0 to 20 characters to the left of the output data. Tap the
label to open a character table for entering the prefix.

Prefixes containing invisible characters are supported.
Affixes 0 to 20 characters to the right of the output data. Tap the
label to open a character table for entering the suffix.

Suffixes containing invisible characters are supported.
Sets the delimiter to separate the output barcode data to the
following pieces: code type, decoded barcode data, and code
length (if applicable). Options are:

None

Comma

Semicolon

Full stop
Specifies the current decoding for barcode data.
By enabling this option, only the last scanned data entry will be
output.
Using Reader Configuration Utility
183
Default
Decoded data +
Enter char
Carriage Return
Deselected
(Disabled)
Deselected
(Disabled)
--
--
None
UTF-8
Deselected
(Disabled)