Adjusting The Speaker Level - Yamaha AV Receiver Owner's Manual

3
Press SLEEP on the remote control
repeatedly to set the amount of time.
Each time you press SLEEP, the front panel display
changes as shown below.
SLEEP 120min
SLEEP OFF SLEEP 30min
The SLEEP indicator flashes while you are switching
the amount of time for the sleep timer. Once the sleep
timer is set, the SLEEP indicator lights up in the front
panel display, and the display returns to the selected
sound field program.
V-AUX
DVR
SP
A
SLEEP 120min
DVR V-AUX DTV/CBL
SP
A
STRAIGHT
4
To cancel the sleep timer, press SLEEP on
the remote control repeatedly until "SLEEP
OFF" appears in the front panel display.
V-AUX
DVR
SP
A
SLEEP OFF
The SLEEP indicator turns off, and "SLEEP OFF"
disappears from the front panel display after a few
seconds.
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANDBY/ON on the
front panel) to set this unit to the standby mode.
SLEEP
SLEEP 90min
SLEEP 60min
pCD
DTV/CBL MD/CD-R TUNER
DVD XM
VOLUME
SLEEP dB
L R
Flashes
pCD
DVD MD/CD-R TUNER XM
VOLUME
SLEEP dB
L R
Lights up
SLEEP
pCD
DTV/CBL MD/CD-R TUNER
DVD XM
VOLUME
dB
L R

Adjusting the speaker level

You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the MULTI CH INPUT jacks.
Note
This operation will override the level adjustments made in
"BASIC SETUP" (see page 28) and "SPEAKER LEVEL" (see
page 80).
y
This operation can also be performed using the control buttons on
the front panel. Press NEXT on the front panel repeatedly to
select the speaker channel whose output level you want to adjust
and then press LEVEL +/– on the front panel to adjust the output
level.
TV VOL TV CH
TV MUTE TV INPUT
STEREO MUSIC
1 2
STANDARD SELECT
5 6
SPEAKERS ENHANCER
9 0
1
LEVEL
TITLE
BAND
A-E/CAT.
RETURN
XM MEMORY
REC
DISC SKIP
(U.S.A. model)
1
Set the component selector switch to AMP
and then press LEVEL on the remote control
repeatedly to select the speaker you want to
adjust.
AMP
SOURCE
TV
• Select "FRONT L" to adjust the front left speaker
output level.
• Select "CENTER" to adjust the center speaker
output level.
• Select "FRONT R" to adjust the front right speaker
output level.
• Select "SUR. R" to adjust the surround right
speaker output level.
• Select "SUR. B" to adjust the surround back
speaker output level.
• Select "SUR. L" to adjust the surround left speaker
output level.
• Select "SWFR" to adjust the subwoofer output
level.
y
Once you press LEVEL on the remote control, you can also
select the speaker by pressing u / d.
USING AUDIO FEATURES
1
AMP
SOURCE
VOLUME
TV
MUTE
ENTERTAIN MOVIE
3 4
EXTD SUR. DIRECT ST.
7 8
NIGHT STRAIGHT
10 ENT.
EFFECT
PRESET/CH
SET MENU
MENU
3
SRCH MODE
ENTER
A-E/CAT.
DISPLAY
2
AUDIO
LEVEL
TITLE
BAND
35