Yamaha AV Receiver Owner's Manual page 34

BASIC SETUP
10
Press j / i to select the desired setting.
PRESET/CH
ENTER
A-E/CAT. A-E/CAT.
Choices: YES, NO
• Select "YES" to complete the setup procedure if
the test tone levels from each speaker were
satisfactory.
• Select "NO" to proceed to the speaker level
adjustment menu in step 12 to balance the output
level of each speaker.
11
Press ENTER to confirm your selection.
A-E/CAT.
• If you selected "YES" in step 10, the setup
procedure is completed and the display returns to
the top "SET MENU" display.
• If you selected "NO" in step 10, the front speaker
level adjustment display appears in the front panel
display.
30
;BASIC SETUP
ROOM: S >M L
SUBWOOFER;;;;YES
SPEAKERS;;;;6spk
SETUP:>OK CANCEL
. CHECK OK?;;;;YES
[ ]/[ ]:Up/Down
[<]/[>]:Select
PRESET/CH
ENTER
A-E/CAT.
12
Press u / d to select a speaker and then j / i
to adjust the balance.
The selected speaker and the front left speaker (or the
surround left speaker) output a test tone in turn.
• Press i to increase the value.
• Press j to decrease the value.
PRESET/CH
ENTER
A-E/CAT. A-E/CAT.
• Select "FR" to adjust the balance between the front
left and right speakers.
• Select "C" to adjust the balance between the front
left and center speakers.
• Select "SL" to adjust the balance between the front
left and surround left speakers.
• Select "SB" to adjust the balance between the
surround left and surround back speakers.
• Select "SR" to adjust the balance between the
surround left and surround right speakers.
• Select "SWFR" to adjust the balance between the
front left speaker and the subwoofer.
13
Press SET MENU to exit from "BASIC
SETUP".
SET MENU
SRCH MODE
;BASIC SETUP
.
FR;;;;;;;;;;
C;;;;;;;;;;
SL;;;;;;;;;;
SB;;;;;;;;;;
SR;;;;;;;;;;
SWFR;;;;;;;;;;
[ ]/[ ]:Select
[<]/[>]:Adjust
MENU