Sound Control - Yamaha RX-V795RDS Owner's Manual

BASIC OPERATION

Sound control

Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
3
Note
This control is effective only for the sound from the main
speakers.
Using the BASS EXTENSION
button
Press this button inward (ON) to boost the bass frequency
response at the main left and right channels while maintaining
overall tonal balance. This function is effective for reinforcing
the bass frequencies when a subwoofer is not used.
EXTENSION
38
BALANCE
0
l l
2 2
3
4 4
L 5 5 R
BASS TONE
BYPASS
ON OFF
Adjusting the BASS and TREBLE
controls
BASS
0
l l
2
3
4
5 5
BASS : Turn this knob clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE : Turn this knob clockwise to increase (or counter
clockwise to decrease) the high frequency response.
Note
These controls are effective only for the sound from the main
speakers.
Using the TONE BYPASS button
Press this button inward (ON) to bypass the tone (BASS and
TREBLE) control circuitry. This function is used for outputting
pure sound and checking the tone control settings. The tone
control circuitry can be used when this button is released
outward (OFF).
BASS
EXTENSION
ON
TREBLE
0
l l
2 2 2
3 3 3
4 4 4
5 5
TONE
BYPASS
OFF