Related Manuals for SkyBell HD
Summary of Contents for SkyBell HD
- Page 1 Syncing the SkyBell Contents • Syncing the SkyBell (Android) • Syncing the SkyBell (iOS) Available Online Version: 1.0 Date: March 11, 2019 Language: English...
- Page 2 • • Open the SkyBell app from your smart device Enter your SkyBell account email address. If there is no SkyBell device attached to your account (which is the case, if you have just created your home screen. • Enter your SkyBell account password.
- Page 3 Step 4 If you do not see the Add a SkyBell screen, do the following: • Put the SkyBell device into Sync Mode. The If not, press & hold the SkyBell device's • button (for approximately 15 seconds) until Tap the Account button. The screen below will SkyBell device is in Sync Mode when the LED is be displayed.
- Page 4 Wi-Fi network to configure the • Return to the SkyBell app by pressing the Back SkyBell device. Connect to the SkyBell device's button on your smart device. Wi-Fi network by following these simple steps: •...
- Page 5 Step 7 Step 8 Step 9 • • • Tap the Continue button at the bottom of the Navigate to your smart device's Wi-Fi Settings Enable your smart device's Wi-Fi function by screen. screen by tapping the navigation icon button tapping the Use Wi-Fi toggle control.
- Page 6 Please ignore this notification. Connected, no internet. • This will connect your smart device to the SkyBell As stated in Step 11, return to the SkyBell app • device's Wi-Fi network. Return to the SkyBell app by pressing the Back by pressing the Back button on your smart button on your smart device.
- Page 7 Step 12 Step 13 • • Tap the Continue button at the bottom of the Select your home Wi-Fi network by tapping on A similar screen to the one below will be screen. displayed. the appropriate network name. • Tap the Continue button at the bottom of the screen.
- Page 8 • Enter your home Wi-Fi network password, Tap the Continue button. You can now turn off Airplane mode to return allowing your SkyBell device to connect to your smart device to its previous configuration. your home Wi-Fi network. • Again, navigate to your smart device's Wireless &...
- Page 9 The screen below will be displayed. A similar screen to the one below will be displayed. control. • Tap the Thumbs Up icon button at the bottom • Return to the SkyBell app by pressing the Back of the screen. button on your smart device.
- Page 10 Step 19 Once the SkyBell device has been successfully configured, the LED will change from blinking orange rapidly to blinking blue / green, and finally to solid green. The SkyBell automatically enters Call mode showing the live video stream from the camera.
- Page 11 • • Open the SkyBell app from your smart device Enter your SkyBell account email address. If there is no SkyBell device attached to your account (which is the case, if you have just created your home screen. • Enter your SkyBell account password.
- Page 12 Step 4 If you do not see the Add a SkyBell screen, do the following: • Put the SkyBell device into Sync Mode. The If not, press & hold the SkyBell device's • Tap the Account button. The screen below will...
- Page 13 Step 5 Step 6 Step 7 • • In Sync Mode the SkyBell device creates a Launch the device settings by tapping the Select the smart device's Wi-Fi network temporary ad-hoc Wi-Fi network. The SkyBell Settings icon. settings by tapping the Wi-Fi network option app connects to this Wi-Fi network to configure below the Airplane Mode option.
- Page 14 Step 10 • A similar screen to the one below will be A similar screen to the one below will be Return to the SkyBell app by double clicking displayed. displayed. the smart device's Home button and selecting the SkyBell app from list of running •...
- Page 15 • • Select your home Wi-Fi network by tapping on Enter your home Wi-Fi network password, the appropriate network name. allowing your SkyBell device to connect to your home Wi-Fi network. • Tap the Continue button. • Tap the Connect button.
- Page 16 Step 13 Your SkyBell device will now connect to your home Wi-Fi network and will also attach to your Once the SkyBell device has been configured, the SkyBell account. During this process the SkyBell LED will change from blinking orange...
- Page 17 Step 14 The SkyBell app requires access to the smart device’s microphone to allow your visitors to hear you when you answer the door. • Grant permission by tapping the OK button. Congratulations! You have successfully set up your SkyBell.
Need help?
Do you have a question about the HD and is the answer not in the manual?
Questions and answers
How do I view door video on my I watch