SkyBell DDA Installation Manual

SkyBell Digital Doorbell Adapter (DDA)
Installation Guide (SKU: DA02101H)
The SkyBell Digital Doorbell Adapter ("DDA") is required for a SkyBell HD Wi-Fi
Video Doorbell device when connected to an indoor digital doorbell chime system.
The SkyBell DDA enables users to remotely control the indoor digital doorbell chime
through use of the SkyBell HD mobile app, (Android or Apple iOS). Users may use
the mobile app to turn-off, or turn-on the chime whenever it is convenient – like a
'Do Not Disturb' type function. When the indoor chime is turned-off, users will con-
tinue to receive call notifications sent to their mobile device, but the chime will not
ring inside the home.

SkyBell Digital Doorbell Adapter Requirements

The SkyBell DDA installs inside of an indoor digital doorbell chime by connecting the
wires to the terminals used for FRONT (representing the front door bell) and TRANS
or TRANSFORMER, used for regulating low-voltage power of wired indoor digital
chime systems. The diagram below shows how the SkyBell DDA connects to the ter-
minals inside of a digital doorbell chime, which is connected to both the SkyBell HD
Wi-Fi Video Doorbell and the transformer.
PR120DDA-04