Table of Contents
Advertisement
5.2.2.
Notes for ADLoG VMTs
Connect the DLT-SA6100 Sensor Stick to a USB port underneath the cable cover of the ADLoG
VMT.
Do not use the service USB port underneath the antenna as the stick can be easily removed here.
In addition, the antenna can no longer be closed due to the stick, meaning the IP protection rating
of the VMT is no longer guaranteed.
To access the USB ports underneath the cable cover, this cable cover on the VMT must be
opened and closed correctly.
Please note:
1. Work on the ADLoG VMT is only permitted to be performed by adequately qualified,
skilled personnel:
2. Follow the instructions in the relevant ADLoG VMT manual.
DLT-SA6100 Manual V1.10
Figure 5.1: Example ADLoG VMT: DLT-V83 with cable cover opened
26 / 43
Initial Start-up
Advertisement
Table of Contents
